MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Remove front element from Vivitar 28mm f2 Auto Wide-Angle?
View previous topic :: View next topic  


Reply

Hi! I bought a Vivitar 28mm f2 Auto Wide-Angle for $20. It's an interesting lens but it has some fungus under the front element. I don't have a lot of experience taking lenses apart, but I have successfully cleaned and lubed a Helios 44-2 and cleaned the inside elements from several other old manual lenses.



I want to get at the back of the front element of this Vivitar but I can't figure out how to take it apart. The filter ring is held in place by one screw. Remove that and then you can turn the filter ring to remove it.



Then there's three screws that look like they hold the entire lens assembly in the body (not shown) and this single screw.





I'm not sure what to do next. Removing this screw and trying to turn out the lens doesn't seem to work. Or I didn't use enough force? It does seem like this part has been glued in - I removed some old glue that had a rubber band like consistency.

The lens was only $20, but it makes interesting pictures and I bought it to take apart and learn. Any assistance appreciated. Thanks!

Here's an angle that really shows the fungus.



Reply

Did I do something wrong with the picture upload? Sometimes I can see them and sometimes I just see broken links?


Reply

davelang wrote:
Did I do something wrong with the picture upload? Sometimes I can see them and sometimes I just see broken links?

Welcome davelang
links & photos not allowed first post as spam prevention


Reply

Thanks! Should I do something differently or is it okay now?


Reply

davelang wrote:
Thanks! Should I do something differently or is it okay now?


You tell me! (Yes)


Reply

Acetone + brute force.


Reply

Thanks! That worked!


Reply

Was the element screwed&glued or just glued?