MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Meyer Primiplan 58/1.9: disassembly problem
View previous topic :: View next topic  


Reply

My old M42 pre-set Meyer Primoplan 58/1.9 can certainly do with a relube of the focussing drive mechanism, but I have some problems taking it apart. Here's how far I have managed.

1. Remove three screws from the back to take off the camera mount ring.

2. Remove the two black-finish screws that work as pins for the straight slots, for effecting rectilinear travel

3. Unscrew lens unit from focussing drive unit, and then...

... the lens unit rotates a few turns and then it cannot go any further to come out of the focussing drive unit. I cannot see anything obvious that stops it from doing so.

I would greatly appreciate any insight into this; thank you in advance.