Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!

SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Yashinon DX 2,8/28 M42 mount problem
View previous topic :: View next topic  


PostPosted: Fri Jul 06, 2018 8:42 pm    Post subject: Yashinon DX 2,8/28 M42 mount problem Reply with quote

Hello,

I bought this M42 Auto Yashinon for cheap. I didn't even think about trying it first. It is a m42 mount but somehow it doesn't screw all the way, as you can see from the pictures with lens mounted on my 77D. Of course, reaching infinity is impossible. I have other m42 lenses, even a Yashinon 1,4/50 that work with this adapter just fine.



Has anyone encountered this problem? Any ideas how to solve this are welcome.
#1


#2


#3


PostPosted: Fri Jul 06, 2018 9:21 pm    Post subject: Reply with quote

Sounds like lens is T-mount -- same thread diameter as M42, but different threads-per-millimeter.


PostPosted: Fri Jul 06, 2018 9:27 pm    Post subject: Reply with quote

I'm not familiar with this particular lens, but just wondering if there's some kind of aperture sensing "lug", as used on Fujica screw cameras, that's causing the problem.
I've got several Fujica lenses, having used that system back in the 70's, and have taken a file to all of them so's I can continue to benefit from my investments.
Without removing the "lug" on the back of the aperture ring, the Fujica lenses won't screw completely home on a "conventional" 42-screw camera, the net result being an "off-centre" lens and an aperture ring that won't turn.
It's obviously not a T2 lens, the aperture pin is a giveaway ... and is that an "auto/manual" switch just visible?

Good luck Smile


PostPosted: Fri Jul 06, 2018 10:20 pm    Post subject: Reply with quote

Did it!

The solution was far more simple than I imagined.

I just removed the base ring to find a little spring lodged there causing the ring to be few millimeters closer to the lens mount, thus preventing the lens from screwing all the way. Who and why someone left it there is a mystery. I doubt anyone else will encounter this exact situation but I am posting the answer, anyway.



Thanks for all replies, this forum is one of nicest communities on the net.
#1


PostPosted: Fri Jul 06, 2018 11:06 pm    Post subject: Reply with quote

Whoo Turtle Congrats

Looks like an aperture-ring spring. Pushes a ball bearing against the lens body. The body has detentions to catch the ball. The detentions are placed so the aperture ring is held in place. The aperture ring clicks.


PostPosted: Sat Jul 07, 2018 8:24 am    Post subject: Reply with quote

visualopsins wrote:
Whoo Turtle Congrats

Looks like an aperture-ring spring. Pushes a ball bearing against the lens body. The body has detentions to catch the ball. The detentions are placed so the aperture ring is held in place. The aperture ring clicks.


You are probably right, now when I think about it that way. The ball bearing is long gone, though. The lens is now declicked properly and focuses to infinity.

Smile


PostPosted: Sat Jul 07, 2018 8:47 pm    Post subject: Reply with quote

Same story with my 50mm f1.7 DSM Yashinon. Ball and spring just refused to stay put. Such a pain to get at too,top down deconstruction all the way,no 'back door'!