MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Spotmatic ES mirror issue, Part 57
View previous topic :: View next topic  


Reply

Hello all! I have a Spotmatic SE with the “stuck” mirror issue. I have read all of the previous threads on this topic and followed the excellent repair directions but I’m still having issues. Specifically, I have removed the bottom plate, carefully cleaned the cog, lever and assembly, and the camera now fires properly almost all of the time at higher speeds (500 and 1000). However, 1 out of every 20 or so times at higher speeds, the lever will not allow the pin to drop as it should, leaving the mirror stuck. This happens 2 out of 3 times at lower speeds. Any suggestions for what to try next? I have included a picture.

Thank you!



Reply

Houseofgee wrote:
Hello all! I have a Spotmatic SE with the “stuck” mirror issue. I have read all of the previous threads on this topic and followed the excellent repair directions but I’m still having issues. Specifically, I have removed the bottom plate, carefully cleaned the cog, lever and assembly, and the camera now fires properly almost all of the time at higher speeds (500 and 1000). However, 1 out of every 20 or so times at higher speeds, the lever will not allow the pin to drop as it should, leaving the mirror stuck. This happens 2 out of 3 times at lower speeds. Any suggestions for what to try next? I have included a picture.

Thank you!



Reply

Thank you, Edgar. I’m not sure happened to the pic on my first post.


Reply

Houseofgee wrote:
Thank you, Edgar. I’m not sure happened to the pic on my first post.



You can't post images or links in your first post, an anti-spam measure. You'll be ok from now on.

Welcome to the forum by the way! Someone should be along who may be able to help.


Reply

Thanks!


Reply

Welcome Houseofgee

(No photos or links in first post is anti-spam protection)