MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Unknown lens mount, request for recognition
View previous topic :: View next topic  


Reply

Long ago in a set with different lenses, there was a modified minolta rokkor 50.1.7 for an unknown mount.
What is the lens mount?

More photos:

https://postimg.cc/gallery/ggzedur6/


#1


#2


#3


#4


Reply

siudym wrote:
Long ago in a set with different lenses, there was a modified minolta rokkor 50.1.7 for an unknown mount.
What is the lens mount?

Czołem! Smile
Considering the small diameter and the decreased F2F distance (register), I would guess that it's some sort of rangefinder mount (guess is the important word here).


Reply

siudym wrote:
Long ago in a set with different lenses, there was a modified minolta rokkor 50.1.7 for an unknown mount.
What is the lens mount?

Now the more I look at it, the more I suspect this is an Exacta mount (the key word here is suspect - some small progress on the road to certainty).


Reply

It is shaped like Exakta but is too small, and Exakta has a locking pin that I don't see in these pics.


Reply

If I interpret your photos correctly, then the diameter of the mount is 44mm, correct? This list:

https://www.graphics.cornell.edu/~westin/misc/mounts-by-register.html

lists mounts by register but also shows their diameter. If the converted lens is made to reach infinity focus, the register of the mount should be 8 to 10mm less than Minolta SR mounts 43.72mm. So maybe the original 4/3 mount (not micro)?