MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

LeicaCamera without transparent plastic at the back.
View previous topic :: View next topic  


Reply

Does it matter what type of transparent red plastic you use on the window at the back of the cameras where you should see the film information? I have a leica camera and need to replace this.


Reply

What model Leica is this? I've never seen a Leica with an inspection window.

As for your question, I suspect any deeply red tinted plastic will do. I have an old pair of sunglasses that would probably be ideal for this. The cool thing about them that I've always liked is they're tinted red, not smoke or some other color. The lenses would probably be too thick for this application, but there's no reason why they couldn't be thinned by sanding, for example. So if you can locate some old red tinted sunglasses, that might be a good source for you.


Reply

cooltouch wrote:
What model Leica is this? I've never seen a Leica with an inspection window.


Starting from the Leica R3, all Leica SLRs up to the R9 do have an inspection window to show you whether there's a film loaded - and if so, which one. It's a rather flimsy yellowish plastic in case of the R3, R4, and R5.

S


Reply

Oh. I just assumed it was an old screw-mount Leica. I'm not familiar with the R cameras.