 Posted: Thu Nov 24, 2016 7:55 pm Post subject: M42 EMF adapter stuck to f/64 |
|
 Posted: Thu Nov 24, 2016 7:55 pm Post subject: M42 EMF adapter stuck to f/64 |
|
|
Mandibela wrote:
Hi all!
I really tried to search for an answer, but alas, was left with no subject even touching the issue I'm having.
I have sourced an emf chipped version (gen. 3) eos-m42 adapter, programmed it (for Jupiter-37a, f/3.5, 135mm) and used it. The last time I remember using the lens, the adapter worked as intended and as advertised, but today this was not the case.
The adapter is stuck on f/64. Nothing I do with any of my camera bodies or modes changes that, they all give me only f/64, hereby leading to the conclusion that the adapter thinks that f/64 is the best the lens can do.
Because some time has passed since the purchase of the adapter and because I have several of them, I'm not sure of the EXACT model of the chip or the manufacturer/seller. Most of the programming guides of these chips however state, that the maximum (min.) aperture programmable is f/45 - so that one would always be able to return to the programming mode (1/60, 64 + 57 + 64...).
So... I think the chip has gotten a jolt, and the memory on the chip has maybe failed.
Has anyone had this issue before? Any ideas on how to reset or reprogram the chip? _________________ Think.
_________________
https://www.flickr.com/photos/mandibela/
_________________
MFLenses:
PK: Asahi SMC Pentax-M: 28/2.8, 50/1.4, 40-80/2.8-4, 80-200/4.5, Cosinon auto MC 40/2.5
M42: Mir-1V, Industar-50-2, Helios 44-2, MC Helios 44M-6, Helios-44M-4, MC Volna-9, Tair-11, Jupiter-37A, Jupiter-21M, Focal MC auto 135/2.8, aus Jena 50/2.8, Petri 45-135/3.5, Zenitar-M 16/2.8... |