MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Repair Sigma Zoom-K 70-210mm (PB mount)
View previous topic :: View next topic  


Reply

Hello all, this is my first post here. I have never repaired lenses by myself, but recently I got not bad, but old and fungused Sigma Zoom-K lens (I guess it is same as Prakticar 70-210mm). I am using it with adapter on my canon. Even if there seems to be quite a lot of fungus on several elements, pictures look ok, unless I point to brighter places and with higher aperture, then some stains start appearing.
I tried opening it by myself, but I got stuck soon after I removed back.
I looked a bit and took it together again.
So the reason I am here... have anyone tried opening that lens ? Is it cleanable ? I know it is zoom lens, so it is more complicated than prime.
From what I can say the back glass element cant be taken off after removing metal ring.
I did not want to remove aperture mechanism so as it is not connected to the element anyway, it seems that lens must be opened from front.
I tried taking off the front "beauty ring" but it does not seem to be going off, I do not want to break lens trying.
n
There seems to be 2 elements what have fungus on them, second front element and element right in front of aperture blades.
I guess if I could take off black glass element I could access the element what is in fright after aperture...

Anyway, enough talk, there are some pictures of back taken off.
I am sorry, but it is quite dark room and pictures are not perfect .
Fungus (hard to see) :

Lens front(some fungus visible):

Lens back opened:

Some additional images:
http://s3.postimg.org/40n91eteb/IMG_0788.jpg
http://s3.postimg.org/6xaa1oz83/IMG_0792.jpg
http://s3.postimg.org/jneies76b/IMG_0794.jpg
http://s3.postimg.org/56r907hoz/IMG_0795.jpg

Any help ideas will be appreciated, main idea is at least to clean the element right after the aperture blades.