Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!

SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Mamiya C330 with a new lens DIY project
View previous topic :: View next topic  


PostPosted: Thu May 13, 2021 7:56 am    Post subject: Mamiya C330 with a new lens DIY project Reply with quote

My newest DIY project.
A Mamiya TLR C330 Professional, now with a rare Elgeet Colorstigmat 4.5/135mm
The finder lens is the standard Sekor 4,5/135 but I bought it with one damaged lenses, the good one is the finder lens now and the taking lens is the Elgeet.
A very solid lens, barrel made of full brass, hard chrome plated. Tessar type, four elements in three groups, made with rare earth glass.
An extrem sharp lens.
I made a test film, an expired Lucky SHD100, it were so old that the paper of the roll has had a chemical reaction with the film itself, it shows a lot of dots, blemishes and others but it has its charme.







PostPosted: Fri May 14, 2021 10:01 pm    Post subject: Reply with quote

Today I load the Mamiya with a Fomapan 100 and developed it with Adox FX-39 II

I thing the Elgeet Colorstigmat makes a great job.



PostPosted: Sat May 15, 2021 6:47 am    Post subject: Reply with quote

Like 1 Like 1 Like 1