MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

90mm ~f/2.2 from plano-convex lens
View previous topic :: View next topic  


Reply

In the past I already attempted to build one objective from a meniscus lens, but I never finished the work (small lens, short focal length, some difficulties).
Recently I bought a plano-convex lens with 90mm focal length and 42.5mm diameter (this one), close to some well known thread size Smile, so I did it again. The result is here: an M42 helicoid plus a couple of short extension rings, and the lens trapped between two M42-M52 step-up-down rings, with some black cardboard iris.



This is one picture taken around f/5 (PP: only a small increase in exposure):



Fully open, contrast is very low, but maybe there was also some light leak, I have to try again. I did not try yet smaller apertures.


Reply

try a newspaper test, put a newspaper on a wall, set camera on tripod and see if it is sharp on any distance?

that will help of engineering it further


Reply

You can add a iris to the front, that will increase sharpness if so wanted, but why,
it is a great soft focus lens as is!


Reply

thanks to both and yes, I'm aiming more at a portrait lens than at a blade, although checking if closing gives more sharpness is always interesting.
By the way, there is already an iris, placed just behind the lens (without, it is ~f/2.2). I wonder if there is a better place... Closer to the sensor? Or in front?


Reply

The work and the result, for me are both 'two thumbs up'.