MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Jupiter 36B Focus ring broken
View previous topic :: View next topic  


Reply

Edited

Last edited by bernhardas on Sat Apr 02, 2016 7:58 pm; edited 1 time in total


Reply

This sounds like the grub screws fixating the focusing grip/ring to the helicoid has come loose. Tightening the screws is usually easily done, once you have access to them. These are the same screws that are purposely loosened to adjust infinity focus (if you look for a description/ how to for your particular lens). The lenses I've fixed this issue with all had their screws accessed from the front, sometimbes directly behind the name ring.


Reply

edited

Last edited by bernhardas on Wed Apr 06, 2016 6:58 am; edited 1 time in total


Reply

Hi,

When bought this lens the focus ring was flimsy but working (3cm of play !). The focus ring is attached to an internal helicoid by two small headless screws (near 3.5 and infinity marks). Align the ring and tighten both screws. You may have to repeat this operation to get infinity mark properly aligned (if wasn't at infinity or minimal distance when the focus ring "broke").

Hope it helps.