MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

New toys
View previous topic :: View next topic  


Reply

Picked up a lovely Canon AE1 over a week ago in extremely good condition, Then put in a bid on an A1 on ebay a week ago and won it.

This thing is utterly immaculate, not the slightest mark on it. I paid 35 quid for it with an equally mint FD 50mm f1.8 with a nice hood. It was in an camera case that had deteriorated but the condition of the camera is amazing.
Got some film from pound land today so I'm all set for a good play.

I must say i think I'm hooked, they are so gorgeous

How are these two cameras regarded by serious film enthusiasts.

Steve.


Reply

Congratulations! Those old cams can be addictive.


Reply

Congratz, these are very nice, there is also a AV-1 Wink


Reply

I sold a bunch of the AE1's in the late 70's and early 80's they were not too expensive but very reliable and I never saw one come back for repair. The A1 was the most advanced camera of its time. 7 modes of automation was unheard of. I had one recently in mint condition but dead as a stone.


Reply

I put new light seals in the A1 the other night so I lost my light seal virginity, piece of piss to do so will do the AE1 next. Just need to cure the very slight shutter squeel now and thats a camera I will never sell. Now I can look out for some FD lenses to replace the lot i sold because they didn't work so good on Digital Rolling Eyes.

Steve.


Reply

The dreaded squeal is easy to fix using the aerosol can and long tube method that's all over the internet. But, most people use WD40 which is the work of the devil, it gets everywhere and is more solvent than lubricant. I use electrical contact cleaner and lubricant, the tiniest squirt you can manage, I practice tiny squirts before I do it Laughing I've done Canon's years ago with this stuff and they work fine with no squeal at all. The cleaner component evaporates off quickly and the remaining dry lube' seems to be very effective. WD40 is a water based product that lingers and creeps, it has uses but not inside the camera.
If the contact cleaner comes without a long tube then use the tube from a can of WD40, the nozzles are usually a standard size. Get it from a local electrical wholesaler and they'll probably have the tubes. It's good stuff for other uses as well.

http://uk.rs-online.com/web/p/contact-cleaners/2361818/

http://jetbutterfly.web.fc2.com/camera/e_squeak.html

an alternative method.

http://rick_oleson.tripod.com/index-157.html

I know some people will be horrified by this, but done carefully it works. The squeal is from the regulator - mirror damper mechanism and a viscous oil will affect the speed and operation, and attract dust.


Reply

Dave you are a star!

Don't suppose you could recommend a set of essencial cross point screwdrivers from RS as well? I'll order them at the same time.

Cheers for that.

Steve.

PS I used your Light seal tips as well.


Reply

Why is it better to use a minimal squirt of lubricant in this proceedure. I have almost cured the Squeal but not completely. It seems to be that i have missed a few teeth on the cog with my spraying. I'm going to try doing one squirt then a shutter release, then another squirt, then repeat this again in the hope that it gets the lubricant on all sides of the cogs.

Before i try this, is this bollox or am i on the right track here. Confused


Reply

Still not cured with this method. Booking it in for professional CLA, this is in too good condition for me to screw up.