| View previous topic :: View next topic |
| Author |
Message |
Srdjan
 Joined: 11 Apr 2012 Posts: 316 Location: Nis
|
 Posted: Tue Mar 18, 2014 8:11 am Post subject: !!!rollei qbm Distagon 35mm F2.8 disassembly!!! |
|
 Posted: Tue Mar 18, 2014 8:11 am Post subject: !!!rollei qbm Distagon 35mm F2.8 disassembly!!! |
|
|
Srdjan wrote:
I need HELP for rollei qbm Distagon 35mm F2.8 disassembly. Until now I open over a 20 lens of QBM mount and all of them are the same like in this tutorial http://forum.mflenses.com/carl-zeiss-planar-or-voigtlander-color-ultron-50-1-8-repair-t49749.html. But now I tried to fix Distagon 35mm F2.8 QBM and I figure it out that this lens is quite different inside. Even I opened Voigtlander Color-Skoparex 35mm F2.8 and it is same like the rest QBM lenses. But Distagon 35mm F2.8 is different. When I start to disassembly I figure it out that I cant reach 3 screws inside beck block that separate mount from aparature ring and rest of beck elements. Plastic ring that is also A/M switch block any further attempts of disassembly beck part and fixing this lens. Anyone any idea hoe to disassembly this part. I need to fix it because aparature ball is felt out and everything is stuck. _________________ Perfection is just another type of anomaly |
|
| Back to top |
|
 |
calvin83
 Joined: 12 Apr 2009 Posts: 7740 Location: Hong Kong
|
 Posted: Tue Mar 18, 2014 10:14 am Post subject: |
|
 Posted: Tue Mar 18, 2014 10:14 am Post subject: |
|
|
calvin83 wrote:
This one?
http://www.bigeye.url.tw/big5/d_cz35_28.htm _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| Back to top |
|
 |
Srdjan
 Joined: 11 Apr 2012 Posts: 316 Location: Nis
|
 Posted: Tue Mar 18, 2014 10:28 am Post subject: Thats it |
|
 Posted: Tue Mar 18, 2014 10:28 am Post subject: Thats it |
|
|
Srdjan wrote:
Very interesting, here is just said r
"You can see there is such a turn on after the two screws, the fixed part is connected with the aperture mechanism M / A switch-related, can be removed, the original screw locations to remember. After removing the aperture can be controlled automatically A / M switch ring is removed, when you remove a little slower, attention will locate ball pop up. Fengyun ball as A / M switch rings for positioning. The ball should be removed again following steps."
But there is no way I can do that like is stuck somehow
Thank you I have to look and make some research _________________ Perfection is just another type of anomaly |
|
| Back to top |
|
 |
calvin83
 Joined: 12 Apr 2009 Posts: 7740 Location: Hong Kong
|
 Posted: Tue Mar 18, 2014 10:54 am Post subject: |
|
 Posted: Tue Mar 18, 2014 10:54 am Post subject: |
|
|
calvin83 wrote:
That can be roughly translate to:
| Quote: |
| You need to unscrew the ring to see the two screws related to the A/M switch. Mark the position of the two screws to ensure you can place them when put them back. You can remove the A/M control ring after removing two screws(watch for the metal ball). Then you can remove the rings in the next photo and access to the three screws holding the rear part. |
_________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| Back to top |
|
 |
Srdjan
 Joined: 11 Apr 2012 Posts: 316 Location: Nis
|
 Posted: Tue Mar 18, 2014 11:17 am Post subject: |
|
 Posted: Tue Mar 18, 2014 11:17 am Post subject: |
|
|
Srdjan wrote:
I remove two screws and I can't remove A/M control ring. Like A/M control ring is less wider than helicoid of ring that goes above it (in which direction suppose to go out). It is plastic ring, maybe I have to bent it somehow any clue? It is strange _________________ Perfection is just another type of anomaly |
|
| Back to top |
|
 |
Srdjan
 Joined: 11 Apr 2012 Posts: 316 Location: Nis
|
 Posted: Tue Mar 18, 2014 11:30 am Post subject: |
|
 Posted: Tue Mar 18, 2014 11:30 am Post subject: |
|
|
Srdjan wrote:
This is how this ring look like. And the part that I paint in red gives me problem to take it out, do I need special tool?
 _________________ Perfection is just another type of anomaly |
|
| Back to top |
|
 |
calvin83
 Joined: 12 Apr 2009 Posts: 7740 Location: Hong Kong
|
 Posted: Tue Mar 18, 2014 11:37 am Post subject: |
|
 Posted: Tue Mar 18, 2014 11:37 am Post subject: |
|
|
calvin83 wrote:
It looks like you may need to bent it a bit to move it but I am not sure. _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|