MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Fed 3 made where?
View previous topic :: View next topic  


Reply

I picked up this nice Fed 3 complete with case and Industar 61 lens. The lens has a couple of dents in the filter ring, obviously dropped. The rangefinder coupling was jammed and the lens would not unscrew. but for £1 I was prepared to take the risk.

However i got the lens off and the rangefinder popped back. The body is in great condition, the optics too. Focus is a little 'gummy' but I'm sure that will be fixed with some lighter fuel.

My puzzle is the body serial and the fact that there is no 'Made in USSR' stamped on it. I've not seen this before. Can anyone enlighten me. The lens has a 89 serial so I'm wondering if the end of communism had anything to do with it.

see the photos









Reply

I don't think you've been robbed Phil. Wink


Reply

You have, what appears to be a very late version of the Fed-3 also know as the Fed-3 L/D ( refering to the Industar lens ). These were made in 1967-68 and are quite common to find. The fact that your`s does not have the "made in USSR" means that it was meant for the local market, but that is not 100% true as Russian put these markings as well as mark of quality on anything with no order what so ever. As for the lens, I too think that this is an early version, meaning that the 1st digit of the serial number indicates the year of production 89xxx = 1968 , 79xxx would be 1967 and etc.

You have a very nice, common example of Russian RF cameras. Fed-3 is one of my favorites. It`s easy to use, very sturdy and looks great. You can do a proper CLA to it yourself in a day or so. The lens is even easier to repair. It takes me ~ 5 mins to soften the focus and 30mins for a proper CLA all way round.

If you need, I might be able to find you a spare part with the filter ring and the selftimer lever.


Reply

Drack wrote:
You have, what appears to be a very late version of the Fed-3 also know as the Fed-3 L/D ( refering to the Industar lens ). These were made in 1967-68 and are quite common to find. The fact that your`s does not have the "made in USSR" means that it was meant for the local market, but that is not 100% true as Russian put these markings as well as mark of quality on anything with no order what so ever. As for the lens, I too think that this is an early version, meaning that the 1st digit of the serial number indicates the year of production 89xxx = 1968 , 79xxx would be 1967 and etc.

You have a very nice, common example of Russian RF cameras. Fed-3 is one of my favorites. It`s easy to use, very sturdy and looks great. You can do a proper CLA to it yourself in a day or so. The lens is even easier to repair. It takes me ~ 5 mins to soften the focus and 30mins for a proper CLA all way round.

If you need, I might be able to find you a spare part with the filter ring and the selftimer lever.


Thanks Drack for your info. I knew it wasnt a 80's model but the 89 on the lens confused me. I think you are righta about the serial. I have a 50's I 61 and what you said appears to apply to that too. I have lined up the rangefinder and have fixed worse lenses. Its very clean and yes I'm sure it will be easy to do.

I have the self timer lever, it was put on wrong. I was unable to re-attach it while in Poland, the screw doesnt appear to 'catch' but I;ll give it a go.

Thanks for the offer, I will let you know if I need the 40.5mm filter ring.


Reply

philslizzy wrote:
Drack wrote:
You have, what appears to be a very late version of the Fed-3 also know as the Fed-3 L/D ( refering to the Industar lens ). These were made in 1967-68 and are quite common to find. The fact that your`s does not have the "made in USSR" means that it was meant for the local market, but that is not 100% true as Russian put these markings as well as mark of quality on anything with no order what so ever. As for the lens, I too think that this is an early version, meaning that the 1st digit of the serial number indicates the year of production 89xxx = 1968 , 79xxx would be 1967 and etc.

You have a very nice, common example of Russian RF cameras. Fed-3 is one of my favorites. It`s easy to use, very sturdy and looks great. You can do a proper CLA to it yourself in a day or so. The lens is even easier to repair. It takes me ~ 5 mins to soften the focus and 30mins for a proper CLA all way round.

If you need, I might be able to find you a spare part with the filter ring and the selftimer lever.


Thanks Drack for your info. I knew it wasnt a 80's model but the 89 on the lens confused me. I think you are righta about the serial. I have a 50's I 61 and what you said appears to apply to that too. I have lined up the rangefinder and have fixed worse lenses. Its very clean and yes I'm sure it will be easy to do.

I have the self timer lever, it was put on wrong. I was unable to re-attach it while in Poland, the screw doesnt appear to 'catch' but I;ll give it a go.

Thanks for the offer, I will let you know if I need the 40.5mm filter ring.


The screw might not catch up because the thread is from the other way around than usual Wink


Reply

Drack wrote:


The screw might not catch up because the thread is from the other way around than usual Wink


I figured that out later! Duhhh. Thanks anyway.


Reply

philslizzy wrote:
Drack wrote:


The screw might not catch up because the thread is from the other way around than usual Wink


I figured that out later! Duhhh. Thanks anyway.


No problem Wink. Hope you`ll shoot the little Fed .


Reply

Thanks Drack, I've sorted out the dents in the lens now and its good to go. I may pop out later if the weather stays good and run half a roll of B&W thru it.

To be honest its not my favourite camera I just dont like the 'slabby' look to it but for a pound I couldnt resist!


Reply

philslizzy wrote:
Thanks Drack, I've sorted out the dents in the lens now and its good to go. I may pop out later if the weather stays good and run half a roll of B&W thru it.

To be honest its not my favourite camera I just dont like the 'slabby' look to it but for a pound I couldnt resist!


Really? I find this to be a very nice looking camera. But we can`t argue about taste Smile. One more thing, do try to set the shutter speeds after the shutter is cocked. If not you might break the shutter.


Reply

Looks wise, it has its charm - but not for me. If you fancy it, make me an offer. My fave is the Zorki 2C, nice classic lines.

I know about the shutter, I am an old time Zorki user. I have noticed that the shutter sometimes stays open (or part open) a wiggle of the rewind knob solves it but it would be difficult to shoot film and trust the shutter to work as it should. So I've not used it today.

Been working on another project. look out for it.


Reply

I saw a very nice Fed 3 today in 'Dagfields' - an antique and crap emporium. Phil knows where I mean. for £35. It's still there....
There wasn't anything worth buying other than a a very tidy, nearly mint, Zenit EM with a Helios 44M for £25, which was the only camera bargain there today. But I've got a load of Zenits and Helios already, I really don't want anymore.


Reply

philslizzy wrote:
Looks wise, it has its charm - but not for me. If you fancy it, make me an offer. My fave is the Zorki 2C, nice classic lines.

I know about the shutter, I am an old time Zorki user. I have noticed that the shutter sometimes stays open (or part open) a wiggle of the rewind knob solves it but it would be difficult to shoot film and trust the shutter to work as it should. So I've not used it today.

Been working on another project. look out for it.


Oh I`m sorry, I will not make you an offer as I have ~ 8 Fed-3 myself Very Happy


Reply

Lloydy wrote:
I saw a very nice Fed 3 today in 'Dagfields' - an antique and crap emporium. Phil knows where I mean. for £35. It's still there....
There wasn't anything worth buying other than a a very tidy, nearly mint, Zenit EM with a Helios 44M for £25, which was the only camera bargain there today. But I've got a load of Zenits and Helios already, I really don't want anymore.


I passed up about 6 Zenits on the market, OK they only wanted a pound or two but I dont need more. And they're difficult to sell on. Not to mention about a kilo in weight.


No problems Drack, you are a big FED fan I see. I bought it as an investment, I'm sure I'll make my money back and more.


Reply

I`m sure you will. Usually when I see any Russian camera for a "pond or two" I grab it despite the fact I need it or not . A great investment. Maybe not the easiest camera to sell but still. It does not take that much space.