| View previous topic :: View next topic |
| Author |
Message |
Carlus
Joined: 08 Sep 2014 Posts: 3
|
 Posted: Mon Sep 08, 2014 1:49 pm Post subject: Pancolar 50 2.0 disassembly (SUCCESS !!) |
|
 Posted: Mon Sep 08, 2014 1:49 pm Post subject: Pancolar 50 2.0 disassembly (SUCCESS !!) |
|
|
Carlus wrote:
Hello,
I really need an help. Last week i received a Pancolar 50 2 zebra m42 with stucked blades.
There are no screws on the back plate (where the mount is) and for this reason i'm not able to open it.
I've tried to turn counterclockwise the back plate but with no success. Infact, there is a little metal lever on the side (that fully open the blades) that prevent to turn the plate.
With regard to the front lens i've removed la name plate and the three metal rings that block the front lens...........but i'am not able to go further.
Thanks for any help
Last edited by Carlus on Wed Sep 10, 2014 7:49 am; edited 1 time in total |
|
| Back to top |
|
 |
Langstrum
 Joined: 16 Feb 2014 Posts: 351
|
 Posted: Mon Sep 08, 2014 2:49 pm Post subject: Re: Pancolar 50 2.0 disassembly (HELP please) |
|
 Posted: Mon Sep 08, 2014 2:49 pm Post subject: Re: Pancolar 50 2.0 disassembly (HELP please) |
|
|
Langstrum wrote:
| Carlus wrote: |
Hello,
I really need an help. Last week i received a Pancolar 50 2 zebra m42 with stucked blades.
There are no screws on the back plate (where the mount is) and for this reason i'm not able to open it.
I've tried to turn counterclockwise the back plate but with no success. Infact, there is a little metal lever on the side (that fully open the blades) that prevent to turn the plate.
With regard to the front lens i've removed la name plate and the three metal rings that block the front lens...........but i'am not able to go further.
Thanks for any help |
I disassemble several lenses but didn't have experience with this one. At least you should post some photos to show your current state, so someone can give you an accurate recommendation (and taking photos of every steps is also very important, too, because you will need to reassemble them and sometimes that's even more troublesome)  _________________
Camera: Sony A7 mark III, A6300
AF Lenses:
Canon EF 50/1.8; EF 200/2.8 L, EF 200/1.8 L, EF 300/4 L Sony E mount SEL 50/1.8 OSS, SEL 16/2.8 Fuji X mount XF 35/1.4 R
MF Lenses: Peleng MC 8/3.5, 17/2.8 Samyang 14/T3.1, 35/T1.5, TS 24/3.5 ED, 85/T1.5, Polar 85/1.4 Auto Revuenon 28/2.8; MC 50/1.4 Vega11U 50/2.8 Carl Zeiss Tessar 50/2.8 (exakta mount) Auto Chinon 50/1.9 Zenitar ME1 50/1.7 Sears Auto Sears 55/1.4; Sears 135/2.8 Auto Yashinon DX 50/1.4; Tomioka 50/1.2 SMC Pentax 50/1.7; 50/1.4 Canon FD 50/1.4 S.S.C; 55/1.2 S.S.C; FD 50/1.2 L; FD 85/1.2 L; 85/1.2 S.S.C Aspherical; FD 80-200/4 L 300/2.8 S.S.C Fluorite FD 300/2.8 L FD 200/1.8 LCosina-S 50/1.2 Helios Helios 44 Chrome f/22, 44-2, 44-3, 44M-4, 44M-7 (58/2), Helios-40 85/1.5 Jupiter Jupiter-9 85/2; Jupiter-37A 135/3.5; Jupiter-21M 200/4 Nikon Ai 105/2.5 Tairs-3S 300/4.5
Voigtlander 15/4.5 Aspherical; Ultron 35/1.7
|
|
| Back to top |
|
 |
mo
 Joined: 27 Aug 2009 Posts: 8979 Location: Australia
Expire: 2016-07-30
|
 Posted: Mon Sep 08, 2014 9:08 pm Post subject: |
|
 Posted: Mon Sep 08, 2014 9:08 pm Post subject: |
|
|
mo wrote:
I don't have the zebra Pancolar but I have the starwars 2/50 M42 and the back does unscrew..try unscrewing counter clockwise.Watch out for the spring under it that works the aperture (via that little side lever),it can spring out...it's a little tricky but simple.That is as far as I went so good luck and post up your findings and photos if you take any.
Just re read that you tried counter-clockwise...perhaps need a little more force? But before you do that, is your lens Exakta mount and does it have any screws on the body near the mount? _________________ Moira, Moderator
Fuji XE-1,Pentax K-01,Panasonic G1,Panasonic G5,Pentax MX
Ricoh Singlex TLS,KR-5,KR-5Super,XR-10
Lenses
Auto Rikenon's 55/1.4, 1.8, 2.8... 50/1.7 Takumar 2/58 Preset Takumar 2.8/105 Auto Takumar 2.2/55, 3.5/35 Super Takumar 1.8/55...Macro Takumar F4/50... CZJ Biotar ALU M42 2/58 CZJ Tessar ALU M42 2.8/50
CZJ DDR Flektogon Zebra M42 2.8/35 CZJ Pancolar M42 2/50 CZJ Pancolar Exakta 2/50
Auto Mamiya/Sekor 1.8/55 ...Auto Mamiya/Sekor 2/50 Auto Mamiya/Sekor 2.8/50 Auto Mamiya/Sekor 200/3.5 Tamron SP500/8 Tamron SP350/5.6 Tamron SP90/2.5
Primoplan 1.9/58 Primagon 4.5/35 Telemegor 5.5/150 Angenieux 3.5/28 Angenieux 3,5/135 Y 2
Canon FL 58/1.2,Canon FL85/1.8,Canon FL 100/3.5,Canon SSC 2.8/100 ,Konica AR 100/2.8, Nikkor P 105/2.5
|
|
| Back to top |
|
 |
Carlus
Joined: 08 Sep 2014 Posts: 3
|
 Posted: Tue Sep 09, 2014 5:19 am Post subject: |
|
 Posted: Tue Sep 09, 2014 5:19 am Post subject: |
|
|
Carlus wrote:
Good news,
I've finally opened the back plate with very strong force.
Later i will post the photos of the process for cleaning the blades, if i have success. |
|
| Back to top |
|
 |
mo
 Joined: 27 Aug 2009 Posts: 8979 Location: Australia
Expire: 2016-07-30
|
 Posted: Tue Sep 09, 2014 5:24 am Post subject: |
|
 Posted: Tue Sep 09, 2014 5:24 am Post subject: |
|
|
mo wrote:
I hope you have success.  _________________ Moira, Moderator
Fuji XE-1,Pentax K-01,Panasonic G1,Panasonic G5,Pentax MX
Ricoh Singlex TLS,KR-5,KR-5Super,XR-10
Lenses
Auto Rikenon's 55/1.4, 1.8, 2.8... 50/1.7 Takumar 2/58 Preset Takumar 2.8/105 Auto Takumar 2.2/55, 3.5/35 Super Takumar 1.8/55...Macro Takumar F4/50... CZJ Biotar ALU M42 2/58 CZJ Tessar ALU M42 2.8/50
CZJ DDR Flektogon Zebra M42 2.8/35 CZJ Pancolar M42 2/50 CZJ Pancolar Exakta 2/50
Auto Mamiya/Sekor 1.8/55 ...Auto Mamiya/Sekor 2/50 Auto Mamiya/Sekor 2.8/50 Auto Mamiya/Sekor 200/3.5 Tamron SP500/8 Tamron SP350/5.6 Tamron SP90/2.5
Primoplan 1.9/58 Primagon 4.5/35 Telemegor 5.5/150 Angenieux 3.5/28 Angenieux 3,5/135 Y 2
Canon FL 58/1.2,Canon FL85/1.8,Canon FL 100/3.5,Canon SSC 2.8/100 ,Konica AR 100/2.8, Nikkor P 105/2.5
|
|
| Back to top |
|
 |
Carlus
Joined: 08 Sep 2014 Posts: 3
|
|
| Back to top |
|
 |
mo
 Joined: 27 Aug 2009 Posts: 8979 Location: Australia
Expire: 2016-07-30
|
 Posted: Wed Sep 10, 2014 12:22 pm Post subject: |
|
 Posted: Wed Sep 10, 2014 12:22 pm Post subject: |
|
|
mo wrote:
That is good news and thanks for the photos. _________________ Moira, Moderator
Fuji XE-1,Pentax K-01,Panasonic G1,Panasonic G5,Pentax MX
Ricoh Singlex TLS,KR-5,KR-5Super,XR-10
Lenses
Auto Rikenon's 55/1.4, 1.8, 2.8... 50/1.7 Takumar 2/58 Preset Takumar 2.8/105 Auto Takumar 2.2/55, 3.5/35 Super Takumar 1.8/55...Macro Takumar F4/50... CZJ Biotar ALU M42 2/58 CZJ Tessar ALU M42 2.8/50
CZJ DDR Flektogon Zebra M42 2.8/35 CZJ Pancolar M42 2/50 CZJ Pancolar Exakta 2/50
Auto Mamiya/Sekor 1.8/55 ...Auto Mamiya/Sekor 2/50 Auto Mamiya/Sekor 2.8/50 Auto Mamiya/Sekor 200/3.5 Tamron SP500/8 Tamron SP350/5.6 Tamron SP90/2.5
Primoplan 1.9/58 Primagon 4.5/35 Telemegor 5.5/150 Angenieux 3.5/28 Angenieux 3,5/135 Y 2
Canon FL 58/1.2,Canon FL85/1.8,Canon FL 100/3.5,Canon SSC 2.8/100 ,Konica AR 100/2.8, Nikkor P 105/2.5
|
|
| Back to top |
|
 |
Langstrum
 Joined: 16 Feb 2014 Posts: 351
|
 Posted: Wed Sep 10, 2014 2:25 pm Post subject: |
|
 Posted: Wed Sep 10, 2014 2:25 pm Post subject: |
|
|
Langstrum wrote:
Congratulation! And very useful photos, too  _________________
Camera: Sony A7 mark III, A6300
AF Lenses:
Canon EF 50/1.8; EF 200/2.8 L, EF 200/1.8 L, EF 300/4 L Sony E mount SEL 50/1.8 OSS, SEL 16/2.8 Fuji X mount XF 35/1.4 R
MF Lenses: Peleng MC 8/3.5, 17/2.8 Samyang 14/T3.1, 35/T1.5, TS 24/3.5 ED, 85/T1.5, Polar 85/1.4 Auto Revuenon 28/2.8; MC 50/1.4 Vega11U 50/2.8 Carl Zeiss Tessar 50/2.8 (exakta mount) Auto Chinon 50/1.9 Zenitar ME1 50/1.7 Sears Auto Sears 55/1.4; Sears 135/2.8 Auto Yashinon DX 50/1.4; Tomioka 50/1.2 SMC Pentax 50/1.7; 50/1.4 Canon FD 50/1.4 S.S.C; 55/1.2 S.S.C; FD 50/1.2 L; FD 85/1.2 L; 85/1.2 S.S.C Aspherical; FD 80-200/4 L 300/2.8 S.S.C Fluorite FD 300/2.8 L FD 200/1.8 LCosina-S 50/1.2 Helios Helios 44 Chrome f/22, 44-2, 44-3, 44M-4, 44M-7 (58/2), Helios-40 85/1.5 Jupiter Jupiter-9 85/2; Jupiter-37A 135/3.5; Jupiter-21M 200/4 Nikon Ai 105/2.5 Tairs-3S 300/4.5
Voigtlander 15/4.5 Aspherical; Ultron 35/1.7
|
|
| Back to top |
|
 |
peter pan
Joined: 04 Nov 2014 Posts: 3
|
|
| Back to top |
|
 |
tonibubu
Joined: 03 Dec 2016 Posts: 1 Location: Germany
|
 Posted: Sat Dec 03, 2016 6:16 pm Post subject: |
|
 Posted: Sat Dec 03, 2016 6:16 pm Post subject: |
|
|
tonibubu wrote:
Thanks for all the useful info. I hate to necro a thread, but I figure I'm not the only one looking for info on how to service this lens.
When I tried to service my lens today I unfortunately couldn't even get past step one. The circular back plate is incredibly hard to unscrew and won't budge a millimeter. Does anyone have a tip how to get the darn thing off? |
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|