MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Please Help Identify Lens Adapter
View previous topic :: View next topic  


Reply

I would really appreciate some help identifying this adapter. I believe it is a Komura Unidapter for a Nikon F body, as it has the Nikon F bayonet mount, it is marked UNI. Made in Japan, and is similar to a T-mount, but is a 47mm screw mount. However, it is different in appearance from a Unidapter System mount (for Canon) that I have on a Komura 105mm f/2.5 preset. And what does the N.M marking stand for? (The old Miranda adapters were marked N.M but they had a 44mm diameter.) The first photo below is the Komura Unidapter, and the next three are the unknown adapter. Thanks for any help!






Last edited by lcostet on Thu Oct 17, 2013 10:41 am; edited 1 time in total


Reply

lcostet wrote:
I would really appreciate some help identifying this adapter. I believe it is a Komura Unidapter for a Nikon F body, as it has the Nikon F bayonet mount, it is marked UNI. Made in Japan, and is similar to a T-mount, but is a 47mm screw mount. However, it is different in appearance from a Unidapter System mount (for Canon) that I have on a Komura 105mm f/2.5 preset. And what does the N.M marking stand for? (The old Miranda adapters were marked N.M but they had a 44mm diameter.) The first photo below is the Komura Unidapter, and the next three are the unknown adapter. Thanks for any help!






First post images won't appear - antispam measure.


Reply

lcostet wrote:
I would really appreciate some help identifying this adapter. I believe it is a Komura Unidapter for a Nikon F body, as it has the Nikon F bayonet mount, it is marked UNI. Made in Japan, and is similar to a T-mount, but is a 47mm screw mount. However, it is different in appearance from a Unidapter System mount (for Canon) that I have on a Komura 105mm f/2.5 preset. And what does the N.M marking stand for? (The old Miranda adapters were marked N.M but they had a 44mm diameter.) The first photo below is the Komura Unidapter, and the next three are the unknown adapter. Thanks for any help!





It looks the Nikon F adapter will fit my 4/24. Can you put the Nikon F adapter to your lens?


Reply

I have reposted and images are live now.

calvin83 - well that's just it...the Unidapter on the Komura is attached with little screws and looks to be a little involved to remove...not at all like the unknown adapter which is a screw on mount.


Reply

lcostet wrote:
I have reposted and images are live now.

calvin83 - well that's just it...the Unidapter on the Komura is attached with little screws and looks to be a little involved to remove...not at all like the unknown adapter which is a screw on mount.

Have you ever tired to unscrew the mount? No screw is required. The 47mm UNI adapter on My Komura 4/24 can be screw off easily like T mount lens.