MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Is there possibility of M42 electric to EOS
View previous topic :: View next topic  


Reply

Sound like interesting idea possibility of M42 “electric” (lenses have three yellowish electric connectors) to mount to Canon EOS.
Main idea is adapter that send information of aparature to chip and then to camera. As I understand M42 electric lenses have electric-mehanism to send this information to camera by electric contacts (probably by difference in voltage). Does anybody tried to something like that?



Reply

Srdjan wrote:
(probably by difference in voltage)


Sorry, no, the signals are digital, not simple voltage levels.


Reply

Iz there any information about that?


Reply

Is there any information about that?


Reply

Inside an electric lens is a variable resistor - exactly like the sliding volume control you used to have on old hi-fi's but semicircular rather than straight.

It is a simple carbon track with an electrical contact on each end and the middle one attached to the aperture ring. The meter on the camera was sensitive to the resistance. Very basic and simple.

No way to adapt it to the Canon which is digital and wants completely different information from the lens.

Also because the carbon track was open to air, they are sensitive to moisture and atmosphere, the carbon sheds and cracks in time (think noisy volume controls on yer hi-fi) making them unreliable.

I guess you want the lens to provide aperture information to the camera without the need for stopping down. I suppose it could be done with A/D converters and specially programmed chips (and of course specialist knowlege of the inner workings of the canon electronic system) but with the carbon tracks Electric lenses being so unreliable it would be almost useless.

A great idea but not workable nor could it be done at a realistic price.


Reply

With certain lens with space near the aperture and in the rear, you may able to make a lens with auto aperture from a broken EF lens. Basically, you are putting PCB, electric contact and the parts related to the aperture from the bokeh lens to the lens you want to modify. You need to replace the aperture of the MF lens with the aperture of the bokeh EF lens.

Check the following thread in a Chinese site.
http://forum.xitek.com/thread-1197170-1-1-1.html


Reply

Thank you calvin83 for this website, interesting idea.
I was more interesting for adapter, but what philslizzy explain me make sense. I was reading these days about Reverse-engineering Canon EF lens protocol. Idea to send somehow information to camera about aparature. And because electric M42 lenses already have some contact (the way they send information) it was interesting idea. So the communication protocol between the Canon camera and lens is 8-data-bit, 1-stop-bit SPI.
But if you said "carbon tracks Electric lenses being so unreliable it would be almost useless", solution is to find mechanism that will replace existing one (in the lens that will be more reliable) and connect to devise that will send information to camera.
I know it sounds like impossible but all great ideas starts like that, otherwise we would be still living in caves and use hands and dirt to make photos Smile

This is one interesting study of Reverse-engineering
http://pickandplace.wordpress.com/2011/10/05/canon-ef-s-protocol-and-electronic-follow-focus/