MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

3 hour camera
View previous topic :: View next topic  


Reply

[topic was 1 hour camera but I adjust it while doing]

More likely 30 minutes. But can't take pictures yet. Smile

It is first iteration of my Ortagoz LF camera project.

Lens is Ortagoz 135/4.5 from Fotokor 9x12 camera. Shutter works but missing the time dial. Faste times work when you insert a screw driver to the hole. Paid 5€ for the assembly. The boards are cardboard from a paper holder.



Bellows is a waste bin bag. Too thin and flexible. No rails etc yet.



Ground glass is household paper usually ment for fish and butter.



It basically works but the bellows hangs in the picture.



Last edited by kansalliskala on Sat Aug 24, 2013 5:23 pm; edited 2 times in total


Reply

Great idea. when you going to put a film through it??


Reply

I'll re-build it, wooden parts and decent bellows will be iteration #2.


Reply

Interesting project. Thanks for sharing! Please, keep on sharing the pics when this your project goes more ahead.


Reply

Yes, I already found nice slotted wood from an old cork notice board frame. My intention is to make the whole camera from recycling stuff.


Reply

[topic updated title]

two more hours of work

Camera is now basically in such state I could take a picture if I had film holder and film. (And some sealings or some other black soft stuff too.)

First of all it has a wooden frame so you can leave it on a quadropod and focus it properly.





But the biggest improvement it has a real changeable film holder / ground glass holder back.





Reply

Cool project! To keep the bellows out of the lens's field of view, you could take a wire coat hanger and bend it into a coil, then insert the coiled up coat hanger inside the bag. That would stay true to your minimalist concept, plus it's basically free.


Reply

I think I could make film (paper) holders out of cardboard and black soil bags. It really keeps light, I put one onto my head and saw nothing.

Dark slide I could cut from a square plastic flower pot.


Last edited by kansalliskala on Sat Aug 24, 2013 5:29 pm; edited 1 time in total


Reply

cooltouch wrote:
Cool project! To keep the bellows out of the lens's field of view, you could take a wire coat hanger and bend it into a coil, then insert the coiled up coat hanger inside the bag. That would stay true to your minimalist concept, plus it's basically free.


Good idea! I thought of wire but it is not flexible.


Reply

I'm making a camera and I have a film holder, I need something to hold it firmly against the back of the camera. The slotted wood looks good where did it come from?


Reply

philslizzy wrote:
I'm making a camera and I have a film holder, I need something to hold it firmly against the back of the camera. The slotted wood looks good where did it come from?


They are from a cork notice (pin-) board.