MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Rodinal 1:100 first try [some AF]
View previous topic :: View next topic  


Reply

I developed two rolls in the same tank, Rodinal 1:100 for approx 55 minutes, 1 min agitation to start and 4 inversions around midpoint.

Tri-X in a F100, 28-80 AF-D lens; or MX with a FA 43/1.9 and Delta 400 (starting at #Cool.


#1

#2

#3

#4

#5

#6

#7

#8

#9

#10

#11

#12

#13

#14


Reply

2,6, and 13 are my faves as to results. Hummm, thinking I'd be kinda pissed at whoever told me this was a good idea. Wink

My best result is using Acros pushed to 200 in 120 format. At box speed I wouldn't have done agitations in the middle. Doing two rolls of
35...would probably go with 1:125 using 4mls each roll in a tank that can hold a liter, or one at a time in a 500ml tank. If you have Acros or TMAX 100/Delta 100, give it another try. Xtol 1:1 would have been a better option for these, using my 20:20 hindsight. Smile


Reply

Not works Sad Rodinal is a grain maker ... especially at dark areas


Reply

Interesting. I've used 1+100 before and never had grain issues. In fact, I used it this weekend to get the best (technically speaking) Ilford PanF 50 images I've ever taken. I've never used 1+100 on high-speed film, though.


Reply

I like the grain however, and am very pleased with the Delta -- much of that roll is available light in the museum so I view the ASA 400 speed as a baseline. For the graveyard Tri-X, either I shoulda agitaged more or not at all, as I got halos. Not that they are inappropriate for the subject matter. I think I used 6 ml in 600 ml water for the dilution.

At any rate, this is good experience, now I know how to get this particular effect. I'm going to try out the semi-stand method that I've been using with the HC-110.
#1


Reply

I was pretty impressed when I tried that stand developing first time, yesterday.

Easy way to get the film developed and I like the results.

Klaus


Reply

So 'stand developing' is non-agitated? I take it you highly dilute the dev, shake it to get the neg covered (and bubbles out) then let it stand for ages.

What is different?

'scuse the questions, I am an experienced home processor but never learned this technique in my early days.


Reply

Some nice shots, 10 and 13 are my favs, but if you'd have the focus on a different spot in no. 12: that would have been my no.1 ! Wink

I never tried anything else besides D76 and agitation.... must learn about some different techniques in the future.... Very Happy


Reply

Yes, I have regrets about #12, I just didn't crank fast enough to get the focus all the way there. Sad

Klaus, your result is nicer than mine, that is if you don't like grain


Reply

I guess 400 and 100 ISO makes a difference!
I like grain, sometimes.

Klaus