MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Zeiss Nettar 517-16
View previous topic :: View next topic  


Reply

I recently took delivery of this fine little camera. In good condition overall, a bit of paint scraped from the back but otherwise nice. The shutter seems to be running slow, it fires like this 'kerrlick' instead of click. So no film thru it yet. has anyone any idea how to get the shutter working nicely? I'm tempted to open it and try the lighter fuel method but I'm afraid to as I may unscrew the wrong thing.

The camera has a Novar 75mm f6.3 lens and a vario shutter with speeds of B, 1/25, 1/75, and 1/200. Are the shutter speeds fixed or does the vario allow me to select in between speeds?







I am away for 10 days with only my P&S and Olympus Trip. Oh, and wife, so i may not be able to read any replies right away. Thanks in advance!
Phil


Reply

Lighter fluid method should work very well, this is a Prontor shutter.
I have fixed @ 20 of these sorts of cameras including a couple of Nettars.

Main difficulty is that to open it you will have to remove the front lens assembly.
First remove the bezel, which should be held by small setscrews on the sides
Then turn the front cell until it comes off.
Then unscrew the cell that holds the second element from the shutter body. This can be very tight.

There are several ways the front plate is held on the shutter; alternately you may just leave the front plate on and just squirt lighter fluid in there on the shutter blades, that may suffice.
Work the shutter a few times while wet, make sure timing is about right, let dry, test again, treat again with lighter fluid if not good, etc.
Clean all the glass surfaces while you're at it, there is probably haze.

Then reassemble. Here comes the hard part.

Reset infinity.
I usually make a "groundglass" of plastic and I tape it on to the film gate.
Then I turn the front cell until I get infinity on the groundglass.
Then I stick the bezel back on properly aligned to infinity.


Reply

Oh, you said Vario - also a Gauthier shutter like the Prontor.
Same thing I said, the Vario is just simpler version of the Prontor. Same fix.


Reply

Ah, the `fun' of old cameras.


Reply

Congrats, certainly you can select from speeds.


Reply

luisalegria wrote:
Lighter fluid method should work very well, this is a Prontor shutter.
I have fixed @ 20 of these sorts of cameras including a couple of Nettars.

Main difficulty is that to open it you will have to remove the front lens assembly.
First remove the bezel, which should be held by small setscrews on the sides
Then turn the front cell until it comes off.
Then unscrew the cell that holds the second element from the shutter body. This can be very tight.

There are several ways the front plate is held on the shutter; alternately you may just leave the front plate on and just squirt lighter fluid in there on the shutter blades, that may suffice.
Work the shutter a few times while wet, make sure timing is about right, let dry, test again, treat again with lighter fluid if not good, etc.
Clean all the glass surfaces while you're at it, there is probably haze.

Then reassemble. Here comes the hard part.

Reset infinity.
I usually make a "groundglass" of plastic and I tape it on to the film gate.
Then I turn the front cell until I get infinity on the groundglass.
Then I stick the bezel back on properly aligned to infinity.


Thanks for the information, thats a job for the next few days. Oh, BTW i use fresh laminating film as 'ground glass' for focus testing. Its cheap and can be cut to any size.