MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

a good topcor(exakta) eos adapter
View previous topic :: View next topic  


Reply

Having acquired two nice aluminum RE.Auto-Topcor lenses (58/1.8 and 135/3.5) needed an adapter for my eos camera.

Since I am very happy with my big_is M42-Eos adapter, I bought a exakta-eos adapter from him.


Both topcor lenses have the diaphragm pin on the back and I manage to take it out on the 58/1.8 by opening up the lens, so the adapter works and it allows infinity focus.

However, the locking mechanism is not spring-loaded an fits very loosely on the locking pin.
This makes the lens rotate in the adapter while focussing, which I really don't like.


My question, can some recommend a good adapter for my Topcor lenses?

Preferably one that doesn't require me to remove the diaphragm pin (since I am having problems opening the 135/3.5.


I know there is an old adapter from Rainbowimaging (see below) but cannot find it on the internet.



Thanks for the replies!


Reply

chris_zeel wrote:
Having acquired two nice aluminum RE.Auto-Topcor lenses (58/1.8 and 135/3.5) needed an adapter for my eos camera.

Since I am very happy with my big_is M42-Eos adapter, I bought a exakta-eos adapter from him.


Both topcor lenses have the diaphragm pin on the back and I manage to take it out on the 58/1.8 by opening up the lens, so the adapter works and it allows infinity focus.

However, the locking mechanism is not spring-loaded an fits very loosely on the locking pin.
This makes the lens rotate in the adapter while focussing, which I really don't like.


My question, can some recommend a good adapter for my Topcor lenses?

Preferably one that doesn't require me to remove the diaphragm pin (since I am having problems opening the 135/3.5.


I know there is an old adapter from Rainbowimaging (see below) but cannot find it on the internet.



Thanks for the replies!

I tried it on my RE GN Topcor 50mm F1.4. I had to adjust infinity on the lens as it is too thick. Not sure about the diaphragm pin problem as I have not use any EOS camera these days.


Reply

Do you have that adapter and are you using it?

I emailed the supplier, but he said that the adapters are no longer in stock.



Any other people who have suggestions for a good adapter for my topcor lens?

Or people who are willing to sell a good adapter?


Thanks for your attention.


Reply

No. I sold it together with the lens.


Reply

I am also unsure...I see adapters but they say not suitable for auto lens. Pls help!