EPM1, how to zoom when focusing?

[IAZA]

Hello, I just bought EPM1 for my wife, we only use manual lenses, I cannot find a way to zoom when using manual lens. Anybody can help me?
Thanks

[fermy]

Never had this camera, but I remember from dpreview review that it's possible. AFAIK right button on the 4 way controller has a magnification symbol, my guess that it should be it...

[IAZA]

[fermy]

If nothing obvious works, try pressing the info button (that cycles through viewing modes, there are many of them). Probably one of the modes is a magnified view. If that fails, go to the setup, cog menu, perhaps magnified view must be enabled there first.

[std]

I guess that should do the trick ( you need to cycle with Info until you find the green square - then 'OK' will enlarge the screen.
I remember i have played with one of those mini pens but i found it very difficult to work with compared to E-P2.
Lack of buttons and touchscreen makes it useless for manual lenses.

What it is good for are small AF lenses as 14mm and 17mm - most probably even the 12mm. It was selling as a bundle with the 12mm here and price was about the same as the lens alone.

If you can live with the poor ergonomics it's the same IQ as the other pens from the same generation.

[Fabian]

I've got an E-PM1 and I only use manual lenses, no problems for me ergonomically and I can use all the functions I need with ease (exposure / iso / magnifying).
Assign the red recording button to magnify, exposure to the wheel, turn on super menu for quick ISO selection (or set it to auto within set boundaries) and you're set.

Setup -> B -> Button Function -> O funtion -> select magnifying glass

[IAZA]

Thanks All for replied
Fabian give exactly right. my cam was hide the menu, so it need to be "on" first. Now I got it.
Result compared to NEX5 is different. and operating too. new system to me.
I bought it coz it has purple color, and my wife love it , beside I have cmount lenses which in NEX , vignette is too strong