MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Century Graphic 23 / Xenotar 80/2.8
View previous topic :: View next topic  


Reply

Having some fun...


The Century Graphic by Nesster, on Flickr

The back that came with it is for 220 -- but I have a 6x9 Graflok that I'd modified to fit the RB Graflex... We'll see if the mod did anything to the light tightness of the back. The Kalart is pretty dim indoors; outdoors in f/8 125 EI 400 weather it is plenty bright. There's an interesting set up with the lens hood - an arm on the bottom mates with the aperture lever and you can rotate the hood itself to select aperture. As the shutter is X synced, I used an SB-28 flash with a PC adapter. The whole thing is a bit heavy and one-handed a bit lopsided, but in use very stable and comfortable. Per the serial numbers both lens and camera are from around 1965.

The former or former-former owner did the aperture thing. The only thing I did was remove a sharp pointer installed under the distance scale and over the left hand focus knob -- I could not figure a good reason for it, it was a danger to a finger, and it prevented the whole thing from folding up.


Crown Graphic 23 by Nesster, on Flickr


Reply

That's excellent Jussi, I have yet to try flash with mine but I will do now I've seen this. Smile


Reply


Ziggy Monkey and Beezle aboard ET's cage by Nesster, on Flickr

No doubt this is a good lens. Tmax 400, Perceptol 1:3 for 15min, sporadic agitation.

The one problem I have is that my 6x9 film back, which worked fine when on the RB Graflex SLR, does not work so well on this camera. the frame spacing is all crap, the thing sets to '1' before the film is even in the gate, and after cramming most of the photos in the first half, the rest of the roll is blank. You wouldn't think simply attaching it via Graflok instead of Graflex back would make such a difference?


Reply

That is an impressive lens indeed, congrats!

You could try a mamiya RB back, I know they are only 6x7 but would do as a stop-gap.

Mt Graphic 23 back has issues too, it always advances the wrong amount when loading so the first frame is half on the paper, half on the film, but I think I've worked out a way around this now.


Reply

Thanks Ian for the info.

I find that I have to leave the frame counter as is on a graflex back, and then wind it to 1, and it has worked ok before. I don't know what's got into it now, maybe there's a way to clean and/or lube the mechanism.

Anyway, I'm a total convert to this camera, I'm very much impressed with the lens. All shots on this roll were at f/5.6...


Creampuff consuming the newspaper by Nesster, on Flickr


Reply

Dammit, I have to stop looking at these Xenotar shots, it's making me quite jealous!

I've been having some issues with camera shake ruining sharpness for me. Typical exposures for me are 1/5, 1/2 or 1 sec at f22 and there is some camera shake on recent ones that has destroyed the sharpness of my Pulnar 2.8/100 lens. I haven't had this problem with other lenses so I'm suspicious of my homemade lens boared for th Pulnr so i will have to make another one, the original Graflex ones are so hard to find here and cost more than the lens/shutter did on ebay. Sad

I'm happy with the tonality I got from this Kodak blue sensitive x-ray film but annoyed about the sharpness being killed by shake, grrr...




Reply

Slow shutter speeds are the bane of the larger hand cameras... guess why they invented various solid objects to lean them against Very Happy

This ebay auction looks promising, I may get one just to see how it's constructed, and whether it works well on camera. Should be not too difficult to replicate. Click here to see on Ebay


Reply

Ohh, nice find Jussi, wish you could get those here.

I took a couple of test shots yesterday to investigate this shake thing and what do you know, I got no shake, so the diy lensboard is probably fine, but eventually I will get a proper one to replace it.

Not the most interesting shot, was just testing for shake and the large dynamic range needed for this pic intrigued me - would the film have a wide enough response to cover it. Kodak Industrex x-ray film again, Pulnar 2.8/100 again, f16 1/5 sec, no shake at all:



Reply

Wow JUssi, superb!


Reply

Ian, 1/5 sec! Wow. That is steady.

I think this seller is in EU and looks like a high quality product:
Click here to see on Ebay

Smile the Speed should be arriving tomorrow. I've gone to great lengths to avoid doing what Mo is about to do: buy a new DSLR Very Happy

Here's a closer and closer and closer bit.. the lens is really fantastic, I can see why the 2.8 Rolleis are so expensive.


#1

#2

#3


Reply

amazing!
looks a real machine, and a very happy photographer to boot!
( makes me understand how much of a newbee to photography I am..)