| View previous topic :: View next topic |
| Author |
Message |
Aanything
 Joined: 27 Aug 2011 Posts: 2187 Location: Piacenza, Italy
Expire: 2014-05-30
|
 Posted: Mon May 27, 2013 11:20 am Post subject: M42 to minolta AF flanged adapter |
|
 Posted: Mon May 27, 2013 11:20 am Post subject: M42 to minolta AF flanged adapter |
|
|
Aanything wrote:
I'm Looking for a flanged adapter to use m42's on my sony alpha.
I already have tons on non flanged ones, but I have a couple of lenses without a/m switch that I'd like to use without opening them.
I remember those as quite common sometime ago, but in my latest ebay searches I couldn't find any.
Can anyone suggest me a place where I can find one?
Thanks. _________________ C&C and editing of my pics are always welcome
Samples from my lenses
My gear
My Flickr |
|
| Back to top |
|
 |
buerokratiehasser
 Joined: 12 Jun 2011 Posts: 470
|
 Posted: Mon May 27, 2013 12:51 pm Post subject: |
|
 Posted: Mon May 27, 2013 12:51 pm Post subject: |
|
|
buerokratiehasser wrote:
If you dont mind losing infinity (or more infinity) you can use a short m42 distance ring with pinthroughpush and jam the push part with half a match.
The problem with this is that you are losing not only infinity, but well anything up to 4 meters, even with the shortest ring of 7mm or so.
Same with m42 teleconverter but the image may not be as good.
You can also try really good tape over the pin but that did never work out reliably with mine, the springs are just too good. |
|
| Back to top |
|
 |
Aanything
 Joined: 27 Aug 2011 Posts: 2187 Location: Piacenza, Italy
Expire: 2014-05-30
|
 Posted: Mon May 27, 2013 5:16 pm Post subject: |
|
 Posted: Mon May 27, 2013 5:16 pm Post subject: |
|
|
Aanything wrote:
Thanks for the tips.
I already jammed tens of stop down pins on my lenses, after trying all sort of possible solutions, the only one that kind of satisfies me is opening the rear part of the lens and jamming the pin.
And while I have little to none problems in doing that on cheap lenses, I would have liked a flanged adapter for the couple of (relatively) expensive m42's with no switch that I recently acquired, in order to avoid both messing up something with the lens when opening it and doing long term damage to the spring by keeping it permanently pressed.
One of them, my second flektogon 4/20, has a little tab on the barrel that stops diaphragm down when pressed, so I just have to remember to put an hand on it right before shooting, but sometimes it's a bit uncomfortable. _________________ C&C and editing of my pics are always welcome
Samples from my lenses
My gear
My Flickr |
|
| Back to top |
|
 |
kuuan
 Joined: 14 Jan 2008 Posts: 4569 Location: right now: Austria
Expire: 2014-12-26
|
 Posted: Mon May 27, 2013 6:06 pm Post subject: |
|
 Posted: Mon May 27, 2013 6:06 pm Post subject: |
|
|
kuuan wrote:
if you don't find any you could try a DIY solution similar to this one on a M42 > K adapter:
http://translate.google.com/translate?sl=ja&tl=en&js=n&prev=_t&hl=de&ie=UTF-8&eotf=1&u=http%3A%2F%2Fwww.pentax-fan.jp%2FLENS%2FM42%2FM42AD.html _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Back to top |
|
 |
Aanything
 Joined: 27 Aug 2011 Posts: 2187 Location: Piacenza, Italy
Expire: 2014-05-30
|
 Posted: Mon May 27, 2013 6:34 pm Post subject: |
|
 Posted: Mon May 27, 2013 6:34 pm Post subject: |
|
|
Aanything wrote:
That seems a suitable solution. Thanks for the link! _________________ C&C and editing of my pics are always welcome
Samples from my lenses
My gear
My Flickr |
|
| Back to top |
|
 |
kuuan
 Joined: 14 Jan 2008 Posts: 4569 Location: right now: Austria
Expire: 2014-12-26
|
 Posted: Mon May 27, 2013 6:57 pm Post subject: |
|
 Posted: Mon May 27, 2013 6:57 pm Post subject: |
|
|
kuuan wrote:
most welcome, wish you best success  _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|