| View previous topic :: View next topic |
| Author |
Message |
entwisi
Joined: 27 Feb 2007 Posts: 7 Location: Accrington, UK
|
 Posted: Wed Feb 28, 2007 9:09 am Post subject: Alternative focussing screens |
|
 Posted: Wed Feb 28, 2007 9:09 am Post subject: Alternative focussing screens |
|
|
entwisi wrote:
Seen the following on dpreview and thought I'd post a link up here. It looks like someone has come up with an alternative that still has focus 'dots' confirmation on a Canon(albeit a bit duller )
http://www.focusingscreen.com/covering_letter.htm
price seems to be ~$80 but I believe its only available for shipping within Taiwan. Anyone got a contact over there? _________________ Entwisi |
|
| Back to top |
|
 |
Katastrofo
 Joined: 26 Feb 2007 Posts: 10405 Location: USA
Expire: 2013-11-19
|
 Posted: Wed Feb 28, 2007 1:20 pm Post subject: Re: Alternative focussing screens |
|
 Posted: Wed Feb 28, 2007 1:20 pm Post subject: Re: Alternative focussing screens |
|
|
Katastrofo wrote:
| entwisi wrote: |
| price seems to be ~$80 but I believe its only available for shipping within Taiwan. Anyone got a contact over there? |
Not directly, no, but I have friends in SG that have friends there, some
have both friends and family by marriage that would vouch for me. They
would then send it directly from Taiwan to me. A little speed bump the
first time, after that, no problem. Of course, they would send to anyone
else via my contacts in SG.
Bill |
|
| Back to top |
|
 |
entwisi
Joined: 27 Feb 2007 Posts: 7 Location: Accrington, UK
|
 Posted: Wed Feb 28, 2007 2:57 pm Post subject: |
|
 Posted: Wed Feb 28, 2007 2:57 pm Post subject: |
|
|
entwisi wrote:
Ooo, I'm getting more and more tempted, let me run it past SWMBO[1]
Looking at teh website they 'look' easy enough to fit, anyone done one?
Ian
[1] She Who Must Be Obeyed aka The Wife! _________________ Entwisi |
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Wed Feb 28, 2007 3:03 pm Post subject: |
|
 Posted: Wed Feb 28, 2007 3:03 pm Post subject: |
|
|
Attila wrote:
Do you think this focusing screen is different or perhaps better than Haoda,Katz-Eye or "noname" what are available on Ebay? I study this subject and I found Katz-Eye will be my choice for my Olympus E-1. May I wrong, what is your opinion ? |
|
| Back to top |
|
 |
zipp
Joined: 02 Mar 2007 Posts: 36 Location: Montreal QC, Canada
|
 Posted: Fri Mar 02, 2007 4:50 am Post subject: |
|
 Posted: Fri Mar 02, 2007 4:50 am Post subject: |
|
|
zipp wrote:
My first focusing screen was a "no name" one. Virtualvillage, from e-bay. A real headache. I've put the original one (Canon) back and I abandoned to think that that chinese cheap screen can be used. Finally, I purchased a Haoda. It's OK, but it works only if you have the aperture wide open. For example, on my Vivitar 400/f6.3, doesn't works. It's too dark for Haoda. So... a little disapointed. Lookig forward for KatzEye.  _________________ Angel |
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Fri Mar 02, 2007 8:04 am Post subject: |
|
 Posted: Fri Mar 02, 2007 8:04 am Post subject: |
|
|
Attila wrote:
Thank you Angel! You made my decision stronger to by Katz-Eye focusing screen. |
|
| Back to top |
|
 |
Ballu
 Joined: 28 Feb 2007 Posts: 912 Location: Columbus, OH. USofA
|
 Posted: Fri Mar 02, 2007 8:11 am Post subject: |
|
 Posted: Fri Mar 02, 2007 8:11 am Post subject: |
|
|
Ballu wrote:
I am using Virtual Village Focusing screen. It never fits right in first few try. I think, either thickness or size is different from Canon. ANd funny part is, if you try few times, you will eventually make it go... but the frustration plus opening the camera screen mechanism is not a fun.
Unless you really want to play with camera, I will not recommend these third party screens. |
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Fri Mar 02, 2007 8:13 am Post subject: |
|
 Posted: Fri Mar 02, 2007 8:13 am Post subject: |
|
|
Attila wrote:
So seems no other way just Katz-Eye. Do you have experience with that ? |
|
| Back to top |
|
 |
naplam
 Joined: 22 Mar 2007 Posts: 480 Location: Spain
Expire: 2013-11-30
|
 Posted: Thu Mar 22, 2007 6:16 pm Post subject: |
|
 Posted: Thu Mar 22, 2007 6:16 pm Post subject: |
|
|
naplam wrote:
| Ballu wrote: |
I am using Virtual Village Focusing screen. It never fits right in first few try. I think, either thickness or size is different from Canon. ANd funny part is, if you try few times, you will eventually make it go... but the frustration plus opening the camera screen mechanism is not a fun.
Unless you really want to play with camera, I will not recommend these third party screens. |
I was considering buying that focusing screen, as i was about to buy a M42 adapter from them too and it was very cheap, but i finally decided against doing it, as i've heard some people say those 3rd party screens mess with the light metering... besides fast lenses shouldn't be too difficult to focus i guess... i'm waiting to recieve a mamiya sekor 55mm 1.4 soon, my first mf lens. I'll see if I can focus properly soon  |
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Thu Mar 22, 2007 6:20 pm Post subject: |
|
 Posted: Thu Mar 22, 2007 6:20 pm Post subject: |
|
|
Attila wrote:
I ordered an Katz-Eye focusing screen let me a couple of weeks and I will give you some information how does it works. |
|
| Back to top |
|
 |
peterqd
 Joined: 28 Feb 2007 Posts: 7449 Location: near High Wycombe, UK
Expire: 2014-01-04
|
 Posted: Thu Mar 22, 2007 9:52 pm Post subject: |
|
 Posted: Thu Mar 22, 2007 9:52 pm Post subject: |
|
|
peterqd wrote:
I'm using the VirtualVillage screen too. I agree with Ballu it took a while to fit it properly, but now it is and I'm practised in using it, I find the AF-confirm beep is often not needed. I'd buy the same again, no problem.
Peter |
|
| Back to top |
|
 |
Katastrofo
 Joined: 26 Feb 2007 Posts: 10405 Location: USA
Expire: 2013-11-19
|
 Posted: Fri Mar 23, 2007 12:21 am Post subject: |
|
 Posted: Fri Mar 23, 2007 12:21 am Post subject: |
|
|
Katastrofo wrote:
| Attila wrote: |
| I ordered an Katz-Eye focusing screen let me a couple of weeks and I will give you some information how does it works. |
Attila, you will not be disappointed. All the Nikon shooters that ordered
the Katz-Eye at Nikon Cafe love theirs! From what I hear it is the brightest
and the best, but it should be: it costs more than any other!
Bill |
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Fri Mar 23, 2007 12:34 am Post subject: |
|
 Posted: Fri Mar 23, 2007 12:34 am Post subject: |
|
|
Attila wrote:
Sound is very good! Thank you Bill! I read what you said on Katz-Eye site good to hear same from an independent source. Price is not very important factor compare digital camera values and lens collection. I ordered for Olympus E1, I satisfied 100% with Nikon D50 focus confirmation. Viewfinder of Olympus E1 pretty cool, but not enough to catch right focus perfectly. |
|
| Back to top |
|
 |
Jesito
 Joined: 24 Aug 2007 Posts: 5745 Location: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Posted: Fri Aug 24, 2007 2:00 pm Post subject: |
|
 Posted: Fri Aug 24, 2007 2:00 pm Post subject: |
|
|
Jesito wrote:
| Ballu wrote: |
I am using Virtual Village Focusing screen. It never fits right in first few try. I think, either thickness or size is different from Canon. ANd funny part is, if you try few times, you will eventually make it go... but the frustration plus opening the camera screen mechanism is not a fun.
Unless you really want to play with camera, I will not recommend these third party screens. |
Hi!. I ordered one of those before finding this nice site... So at least I shall try it.
The problem is that I'm unable to fit the new screen in place of the old one.
When you said It never fits right in first few try, did you mean one has to trim it out to make it fit in place?.
This is mine: (The left one is the Canon, the right one is the V.Village). My camera is a Canon 350D (Digital Rebel XT).
Thanks in advance!
Jes. |
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Fri Aug 24, 2007 2:12 pm Post subject: |
|
 Posted: Fri Aug 24, 2007 2:12 pm Post subject: |
|
|
Attila wrote:
I sent you an answer in other thread. |
|
| Back to top |
|
 |
Jesito
 Joined: 24 Aug 2007 Posts: 5745 Location: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Posted: Fri Aug 24, 2007 11:17 pm Post subject: |
|
 Posted: Fri Aug 24, 2007 11:17 pm Post subject: |
|
|
Jesito wrote:
| Attila wrote: |
| I sent you an answer in other thread. |
Thanks!, I got it. Sorry to double post, but I'm quite new here...
Best regards,
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Fri Aug 24, 2007 11:23 pm Post subject: |
|
 Posted: Fri Aug 24, 2007 11:23 pm Post subject: |
|
|
Attila wrote:
No problem at all. |
|
| Back to top |
|
 |
Flor27
 Joined: 13 Sep 2007 Posts: 1195 Location: Paris, France
|
 Posted: Fri Oct 05, 2007 8:15 pm Post subject: |
|
 Posted: Fri Oct 05, 2007 8:15 pm Post subject: |
|
|
Flor27 wrote:
Hi all,
First, almost if not all alternative focus screen makers are using existing brand new screens from welll know camera manufacturers that are then CNC micromachine cutted to fit dSLR.
I've emailed some questions to the focusingscrens.com guy's, and their screens looks like better than most of all other available (Virtual Village, Haoda, KatsEyes) because of using better brand new screen.
Focusingscreens said that Katz Eye use Nikon K3 screen and Haoda Minolta X700 one's. All their own production is detailed here :
http://www.focusingscreen.com/test.htm
As you can see, they are not hidding such a fact and so, you can choose a screen that you may already know on some film SLR of full frame dSLR.
About the "350D red dot AF confirm point", as far as I can trust the Google Translation service, you should not think that you will retrieve them with their dedicated 350D screens.
They have done 6 tiny hole using laser on the AF positions (all but not the 3 vertical center ones), is such a way you can see where is AF can do the focus, according your own AF dot choice. Clearly, you will not retrieve the red dot but you can see where the AF will do the focus.
You can see on the last image from the following page a focusing screen will all the AF dots illuminated :
http://www.focusingscreen.com/work/canon_aps_doc.htm
Hope this help, indeed I would like to order one of their screen but first I would like to know more about the real focusing scren they use, if anyone have used them :
Nikon F6-A, F6-J, F6-L and K-3
Canon Ec-A, Ec-B and Ec-L
Sorry for my bad english... _________________ Switching from M42 to Minolta MD & Contax/Yashica |
|
| Back to top |
|
 |
440roadrunner
 Joined: 07 Aug 2007 Posts: 52
|
 Posted: Tue Oct 09, 2007 6:07 pm Post subject: |
|
 Posted: Tue Oct 09, 2007 6:07 pm Post subject: |
|
|
440roadrunner wrote:
Thanks for the info, but is there a way to get an English page? |
|
| Back to top |
|
 |
Flor27
 Joined: 13 Sep 2007 Posts: 1195 Location: Paris, France
|
 Posted: Tue Oct 09, 2007 7:32 pm Post subject: |
|
 Posted: Tue Oct 09, 2007 7:32 pm Post subject: |
|
|
Flor27 wrote:
I don't read chinese at all, so I'm using Google translation service (Chinese to English BETA) here :
http://www.google.com/language_tools _________________ Switching from M42 to Minolta MD & Contax/Yashica |
|
| Back to top |
|
 |
shad309
 Joined: 08 Mar 2008 Posts: 453 Location: Illinois, USA
|
 Posted: Sun Mar 09, 2008 7:56 pm Post subject: Hoada |
|
 Posted: Sun Mar 09, 2008 7:56 pm Post subject: Hoada |
|
|
shad309 wrote:
I just purchased a screen from Hoada, should have it in next few days. When I ordered, he told me that he is on 3rd generation now. Once it's installed and I have played with it I will be posting a review. Also, he was the only vendor that replied back to an email question and gives 100% money back guarantee. Will post results soon.... |
|
| Back to top |
|
 |
shad309
 Joined: 08 Mar 2008 Posts: 453 Location: Illinois, USA
|
 Posted: Sat Mar 15, 2008 2:26 pm Post subject: |
|
 Posted: Sat Mar 15, 2008 2:26 pm Post subject: |
|
|
shad309 wrote:
I recieved my screen last night from Hoada. It was very easy to install, took about 5 minutes. First impressions: It is clear and much brighter than the stock Canon 400D screen. The splits start to go black at f/11 and completely black at f/16 (very useable). Focus was spot on with no need for adjustments. When I put on my junk AF lenses, I could tell that they have a slight front focus issue- that is EASILY corrected now!!!
I will be going out shooting tomorrow morning and will post some of the shots in the gallery and on my flickr site. I will give a more detailed review of this new 3rd Generation screen after playing more and whether or not it was really worth it. First glance is very promising.
More soon...... |
|
| Back to top |
|
 |
|
|