MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

rangefinder problem, IIIa, summar, CL, and...
View previous topic :: View next topic  


Reply

Got a Leica IIIa, and it focuses OK with my summar f2 50mm. It's a relatively not soft summar. Anyway, Got a CL, and a 90,, genuine LTM to M adapter for the summar, I know it ain't a 50mm adapter but takes the summar just fine.
My problem is that when using it on my IIIa double images coincide fine at infinity, but when on my new CL( no M lens yet) double rf image focuses just a bit before infinity lock position. I don't have another M lens to try on the CL. What could be wrong?


Reply

If the Summar lines up the rangefinder images correctly at infinity AND the results on film are in sharp focus at f2, then it's pretty certain that the lens is not faulty. Genuine Leitz screw/bayonet adapters can - in my experience at least - be relied upon to be correctly made (and, as you say, it makes no difference which one you use). That, sadly, leaves the camera as the prime suspect.

However, before you do anything else, it's a good plan to take some pictures with the Summar/CL combo and look carefully at the results. Take pictures at all distances from 1 meter to infinity and at different apertures. If the results are all pin-sharp, then ignore the failure to line up the images correctly in the viewfinder. If they're not properly sharp, then you'll need to get the rangefinder adjusted. That's not a hugely expensive job and one that can be done by any competent camera technician.

If you have another lens, try that as well . . . but remember that Russian lenses can sometimes be less than totally accurate with Leica rangefinders.


Reply

So, Stephen, you're saying scale focus regardless of coupled image in the viewfinder, or focus through the viewfinder at all apertures and distances?
Something tells me to wait until I get the c 40mm summicron. Then I 'll be able to shoot a roll and look for the images that will determine whether the body or some sort of adapter/lens combo. I am on a tight budget you see.
Cheers.


Reply

Could it have to do with the fact that the summar lens has infinity lock position, therefore goes a tad further in order to lock?


Reply

hi greem !

No, the infinity lock has nothing to do with the problem UNLESS it's somehow been damaged so that the catch can't locate properly. But if that were the case, you would already have a problem on your Leica IIIa.