MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

summar 50mm on Leica CL
View previous topic :: View next topic  


Reply

Can it work?
Can it focus at all distances, not only infinity?
Can it mount and couple with the rangefinder?
Smile


Reply

Yes
Yes
Yes
but you will a screw-to-bayonet adapter and DO NOT COLLAPSE THE LENS WHEN ON THE CAMERA - it will ruin the meter-arm.


Reply

+1
Little addition
Rangefinder-Base on Leica CL is small - it will be not easy to focus on short distances wide open, but I guess it will be no problem above 2m


Reply

I see.
So an original 50mm leica adapter, ltm to m will make it work.
Will a Kipon adapter work?
I am not going to jeopardize my CL. I am going to stick with the IIIa for the summar, and
perhaps use my industar 61 on the CL.
What happens in the viewfinder of the CL when an industar 61 is mounted on the body?
Do the 50mm lines show along with the 40mm and 90mm, only they light on?
Do only the 50mm lines show(in the case of the industar it is a fifty something mm, not 50mm) and the rest disappear?
Sorry, I am looking to buy a summicron c 40mm and in the mean while am insearch of a not expensive ltm to m adapter to use with the camera, and don't know how will the viewfinder look like once will have a lens mounted on it.


Reply

Hi there greem!

The most reliable screw-to-bayonet adapters are the original Leitz/Leica ones and the current Voigtlander ones. By reliable, I mean they will will fit on the camera smoothly and be the correct thickness to ensure accurate focusing. I have both types. I also have a VERY cheap Chinese one which works perfectly on my Leica M2 and also on my M8 . . . but we have to accept that the really inexpensive ones may not always be perfectly smooth fitting or not give dependably accurate rangefinder focusing.

With Russian lenses you may not get accurate focusig with any adapter. Some are fine, others not so good. This is because of the dimensions and the tolerances used by their makers. They are meant to work on Fed and Zorki cameras which may have slightly different different lens-to-film register differences. I have three Russian lenses and none of them focus correctly with the rangefinders on my Leicas or on my Voigtlander Bessa R. But, some people find they work okay. It's a bit of a gamble.

The Leica CL shows frames for 40mm and 50mm lenses but I can't recall whether both are there all the time. You should buy a screw bayonet adapter for 50mm lens if that's what you're going to use, then you can be sure you will get a 50mm frame to appear. If it's not already there.

If your camera is in proper working order, it WILL be capable of focusing accurately with a 50mm f2 lens or a 90mm f2.8, even at 1 meter, IF you line up the images carefully. I know, because I used to have one. I also can tell you that if you don't take care to do that, you'll get out-of-focus results Very Happy

So, until you find a 40mm Summicron, my suggestion is to buy a trustworthy adapter and see how the Industar works. If it doesn't focus correctly, a Leica or Voigtlander adapter can always be sold for pretty much what you paid for it.


Reply

The reason I bought the CL is the summicron c 40.
I like the images I've seen so far.
I like the fact it is small, it works with a mechanical film rangefinder for the 70's that fits well in my hands and I can carry everywhere.
The industar works absolutely swell with my E-P1, very very sharp. I haven't had a film processed yet, one from my IIIa +industar.
I will try to find a cheap 50mm ltm to m type one voigt or leitz, but so far they're expensive for an adapter. After all I am in a financial crisis.
When there is no lens on the CL all frame lines show simultaneously, white not lit.
Perhaps they show when the 40mm will finally mount on it.
Thanks for the reply.