MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

1982 expired Technical Pan in 1986 expired Microdol-X pt2
View previous topic :: View next topic  


Reply

This is becoming my favourite film/developer combo, I do 1:3 Microdol-X for 45mins at 20C and rate the film at 50 ISO.

EOS 10qd with Zenitar M2S 2/50.

Just before sunset, light was beautiful with dark deep shadows.

#1

#2

#3

#4

#5

#6

#7

#8


Reply

Nice series, especially #2. I'm a sucker for old wooden boats, but this picture makes it even without that.


Reply

Cheers Jussi, that old boat is a favourite subject, it hasn't moved in a couple of years. I also shot a roll of FP4 where half of the shots were of the boat and small details on it like the ropes, I'll develop it and scan it tonight.


Reply

Great images Ian, I love them all!


Reply

Cheers, was lucky to have really special light just before sunset.


Reply

It's pretty amazing, the results you're getting with that old film and developer. It still exhibits surprisingly good latitude. If the developer was kept in its original packaging then it probably didn't lose much potency, if any. But the film is a different matter.

I have some Plus X Pan that expired in 1983 that I'm slowly working my way through. I bought a pile of it 20 years ago, and for many of those years, it sat in the bottom of my freezer, forgotten about. Until a couple years ago, when I dug it out and started shooting with it on occasion. I think I still have about a half dozen rolls left. I've found that if I do as you and over expose the film, and then, using fresh D-76, extend the development time by about one minute, I get excellent results. The film wants to cup fairly badly once it's dry, but I can deal with that.


Reply

Cheers Michael. Tech Pan and Microdol-X seems an almost ideal combo really. Ten bottles of Technidol sold cheap on ebay this week, I didn't bid because I'm happy with the results I get from Microdol-X.That Plus-X sounds similar to the 1980s FP4 I have. This Tech Pan must have been stored well I think, it also shows that slow films last well. I have some 1980s Kodalith that I no good at all, lost speed, heavy level of base fog. I also have some 1990s HP5 tat is similarly no good, really heavy base fog and lost a couple of stops of speed. It's a bit of a gamble buying old bulk rolls, but 80% of the stuff I've bought has been good, luckily. The only thing I don't like about Tech Pan is it's out of production and I only have about 20 rolls left. Sad

BTW, my Microdol-X was a sealed metal 5l can so was in perfect condition. I'm down to the last litre so need to buy some more, I can buy a copy by Speedibrews for 14.95ukp for 15 litres worth of powder, so it's dirt cheap and I think I will be using little else.


Reply

Sadly, Plus X is also out of production (again). For an ISO 125 film, I've really liked it. It's good to know about FP4, though, because it looks to be an ideal replacement. Fortunately, there is no detectable base fog issues with my Plus X. Then again, far as I know it's been kept refrigerated or frozen its entire life after it expired. The guy I bought it from told me it had been kept refrigerated or frozen and I believe he was telling the truth. I also bought a bunch of other film from him, and this other stuff has come out well, despite its age.

Just a couple shots from the Plus X stash of mine. You'll notice that the first shot is grainier than the second one. This is because I developed the two differently. The first was developed using D-76 diluted to 1:1, for a one-shot development, and the second was the traditional method, with the developer full strength, straight out of the bottle. I like the convenience of 1:1, but I can't say I like the added grain this development method produces. It's not so bad with medium format, but with 35mm it borders on too much for my tastes.

How about you? Any particular reason you dilute Microdol-X to 1:3? Does it make a difference with the film's grain?


[/b]


Reply

I think Plus-X and FP4 are roughly equivalent, never used the Kodak stuff much, it was always more expensive here in the UK.

Microdol 1:1 is grain reducing, 1:3 you still get grain reduction but not as much. The difference in that at 1:1 you lose speed and 1:3 you don't, and 1:3 stretches the tonal range giving better tonality and more detail in highlights.

I just started with 1:3 after reading the pros and cons, liked it a lot and stuck with it.


Reply

Ian, I like so much your B&W series. You can find very good subjects in any stage. And I'm surprised by your productivity.


Reply

Thankyou Izvar, I'm lucky to live in a place with much scenery, and I have plenty of spare time to explore it.


Reply

#2 is my favourite too Ian. You're really lucky to be in such a beautiful place!


Reply

Cheers. You can see the whole of the Cumbrian mountain range in #2, it's rare to get a clear day where you can see all the mountains though. I have still to get a good shot of that view, I'm going to try again with my Tair-3C 4.5/300 on my NEX next time it's clear, but even that might not do it.

Here's a 6 shot stitched panorama I forgot to post. It's what I shot at the end of this roll of Tech Pan to finish it off. I turned the camera to portrait orientation than made 6 overlapping shots. Stitched them in photoshop. Worked okay, the right hand side with the blown highlight is a bit annoying. Landscape work like this is really not what 35mm is good for, medium format at minimum, large format really, I wish I had one of those Fuji 6x17 cameras...