MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Old Fujica to Leica M?
View previous topic :: View next topic  


Reply

Guys looking to pick your brains on this one, I have a need to adapt an old Porst 50mm f1.2 (old Fujica x) to leica M. I know the adapter doesn't exist for that yet, I have a EF to leica M, M42 to Leica M and and OM to Leica M ams wonder if any of you know a workaround?


Reply

That's a tough one. I'd look into taking fujica mount from old camera or another adapter and putting it on a canon fd to Leica m adapter using a 1.5mm spacer. (Or some such contraption)

https://www.graphics.cornell.edu/~westin/misc/mounts-by-register.html


Reply

Make your own with the mount from Fujica X adapter?


Reply

I was worried you'd suggest making my own 😂, if that's the only option it'll have to do though, thanks for making it easier with the canon and spacer dimensions


Reply

The back focus is really short, 43.5 shorter than canon EOS and a little longer than FD. But there are no adaptors to FD otherwise your problem would be solved.

definitely a do-it-yourself job


Reply

I wonder if I could swap the plate from my Fujica to E mount adapter on to a minolta to leica M?

They share the same flange distance, I should have said this is for a Techart Pro Lmea9 adapter




Reply

caledonia84 wrote:
I wonder if I could swap the plate from my Fujica to E mount adapter on to a minolta to leica M?

They share the same flange distance, I should have said this is for a Techart Pro Lmea9 adapter



Check the Mount diameter and Locking pin position.


Reply

caledonia84 wrote:
I wonder if I could swap the plate from my Fujica to E mount adapter on to a minolta to leica M?

They share the same flange distance, I should have said this is for a Techart Pro Lmea9 adapter




its the first possibility but the plates may not be matching sizes or thicknesses, but there's only one way to find out...


Reply

caledonia84 wrote:
I wonder if I could swap the plate from my Fujica to E mount adapter on to a minolta to leica M?

They share the same flange distance, I should have said this is for a Techart Pro Lmea9 adapter




That information is suspect. The old long-standing list at https://www.graphics.cornell.edu/~westin/misc/mounts-by-register.html indicates 43.72 not 43.5...

EDIT: Wikipedia list has 43.5 which is probably correct. Now I recall the westin list under scrutiny revealed sometimes film thickness was included; sometimes not.


Last edited by visualopsins on Thu Jul 13, 2023 7:15 pm; edited 1 time in total


Reply

0.22mm difference is should not caused any problem on the LM adapter and EA9 combo unless the LM adapter is thicker than usual.


Reply

Ah very interesting! I agree I think .22 of a difference will be within the techarts tolerances as it does act as an extension tube for closer focus when needed.



Looks like the Mamiya would be a better fit though 🤔