 Posted: Wed Feb 13, 2013 12:48 pm Post subject: T-max 400, RB Graflex Series B |
|
 Posted: Wed Feb 13, 2013 12:48 pm Post subject: T-max 400, RB Graflex Series B |
|
|
Nesster wrote:
As 6x9 Graflex backs are scarce, I'd have had to buy another Graflex camera to get one, it seems, I decided to take a Graflok back and mod it to Graflex. I'm shy about showing the after picture as I wasn't neat with the Dremel
2x3 Graphic vs Graflex roll film back by Nesster, on Flickr
On the left the GRAPHIC back that fits a GRAFLOK.
On the right the GRAFLEX back that fits most Graflex SLRs
These are 2x3 backs, the only size where the two have the same dimensions.
The GRAFLOK one has two ridges at the end of the back, where the Graflex has a groove ending in notches at the edges. On the Graflex camera there is a metal lip that mates with the groove for light baffling, with a bend at both ends to mate with the notches to position the back. The ridges of the Graflok style do the same with a Graflok.
All you need to do is cut a groove in the Graphic where the Graflex has one, plus the notches at each end. And grind down the ridge closest to the film opening. After cleaning the metal dust off, test on camera and adjust as necessary till it fits snug.
Results, Tmax-400 in HC-110, using the Lumenized Ektar lens that came with the camera
February Snow by Nesster, on Flickr
accumulation by Nesster, on Flickr
Blowing snow by Nesster, on Flickr _________________ -Jussi
Camera photos
Print Photographica
|