| View previous topic :: View next topic |
| Author |
Message |
iangreenhalgh1
 Joined: 18 Mar 2011 Posts: 15679
Expire: 2014-01-07
|
 Posted: Sun Jan 27, 2013 10:53 pm Post subject: Agfa Copex HDP13 in Kodak Microdol-X part 7 |
|
 Posted: Sun Jan 27, 2013 10:53 pm Post subject: Agfa Copex HDP13 in Kodak Microdol-X part 7 |
|
|
iangreenhalgh1 wrote:
This roll I exposed at ISO 100 as an experiment to see how it affected grain and tonality. I developed for 15mins in 1:3 Microdol-X at 25C and this seems about ideal, all my previous efforts with this film have been overdeveloped, and this was detrimental to tonality and grain.
EOS 10qd with Micro-Nikkor 3.5/55. The more I use this old Nikkor the more I like it, just a great lens.
#1
#2
#3
 _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Sun Jan 27, 2013 11:19 pm Post subject: |
|
 Posted: Sun Jan 27, 2013 11:19 pm Post subject: |
|
|
Attila wrote:
I think developing process is right if you wish better tonality try yellow filter, these are good ones! |
|
| Back to top |
|
 |
iangreenhalgh1
 Joined: 18 Mar 2011 Posts: 15679
Expire: 2014-01-07
|
 Posted: Sun Jan 27, 2013 11:44 pm Post subject: |
|
 Posted: Sun Jan 27, 2013 11:44 pm Post subject: |
|
|
iangreenhalgh1 wrote:
Cheers. I think I've nailed down the correct dev times/temps now:
ISO 25 - 10 mins, 25C
ISO 50 - 12.5 mins, 25C
ISO 100 - 15 mins, 25C
I'll have to see if I have a Yellow filter to fit, I had a look for one the other day and only found a 40.5mm one, but I did find an orange filter. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Back to top |
|
 |
David
 Joined: 13 Apr 2011 Posts: 1869 Location: Denver, Colorado
Expire: 2013-01-25
|
 Posted: Mon Jan 28, 2013 3:56 am Post subject: |
|
 Posted: Mon Jan 28, 2013 3:56 am Post subject: |
|
|
David wrote:
I like the first shot quite a bit. Well presented and interestingly laid out. _________________ http://www.youtube.com/user/hancockDavidM |
|
| Back to top |
|
 |
Nesster
 Joined: 24 Apr 2008 Posts: 5883 Location: NJ, USA
Expire: 2014-02-20
|
 Posted: Mon Jan 28, 2013 11:23 am Post subject: |
|
 Posted: Mon Jan 28, 2013 11:23 am Post subject: |
|
|
Nesster wrote:
Yes, you hit the King Dick this time. Tonality is excellent. _________________ -Jussi
Camera photos
Print Photographica
|
|
| Back to top |
|
 |
iangreenhalgh1
 Joined: 18 Mar 2011 Posts: 15679
Expire: 2014-01-07
|
 Posted: Mon Jan 28, 2013 12:28 pm Post subject: |
|
 Posted: Mon Jan 28, 2013 12:28 pm Post subject: |
|
|
iangreenhalgh1 wrote:
Cheers guys. When I saw the name on that spanner I had to make it visible in the shot  _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Back to top |
|
 |
skida
 Joined: 02 Mar 2012 Posts: 1826 Location: North East England
|
 Posted: Mon Jan 28, 2013 3:12 pm Post subject: |
|
 Posted: Mon Jan 28, 2013 3:12 pm Post subject: |
|
|
skida wrote:
| Nesster wrote: |
| Yes, you hit the King Dick this time. Tonality is excellent. |
+1
I like this result best. |
|
| Back to top |
|
 |
TVR
 Joined: 19 Jan 2012 Posts: 97 Location: Brandon, MB
|
 Posted: Fri Feb 01, 2013 2:07 am Post subject: |
|
 Posted: Fri Feb 01, 2013 2:07 am Post subject: |
|
|
TVR wrote:
just had to add i have some of those spanners "King Dick" whitworth use them on the sunbeam and norton |
|
| Back to top |
|
 |
iangreenhalgh1
 Joined: 18 Mar 2011 Posts: 15679
Expire: 2014-01-07
|
 Posted: Fri Feb 01, 2013 9:38 pm Post subject: |
|
 Posted: Fri Feb 01, 2013 9:38 pm Post subject: |
|
|
iangreenhalgh1 wrote:
Glad you enjoyed the King Dick I think my dad has a full set of em, the small spanner on the left is also a King Dick.
Important to have Imperial ones, there's nowt metric on a 1950s Rover.  _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Back to top |
|
 |
Katastrofo
 Joined: 26 Feb 2007 Posts: 10405 Location: USA
Expire: 2013-11-19
|
 Posted: Sat Feb 02, 2013 12:43 am Post subject: |
|
 Posted: Sat Feb 02, 2013 12:43 am Post subject: |
|
|
Katastrofo wrote:
Yep, these are fabulous results!  |
|
| Back to top |
|
 |
iangreenhalgh1
 Joined: 18 Mar 2011 Posts: 15679
Expire: 2014-01-07
|
 Posted: Sat Feb 02, 2013 1:05 am Post subject: |
|
 Posted: Sat Feb 02, 2013 1:05 am Post subject: |
|
|
iangreenhalgh1 wrote:
Cheers Bill. I'm going to try similar subjects with Kodalith shortly, I feel that film may be ideally suited for this sort of subject. I did shoot a roll of FP4 of the same subjects for comparison, but I shot it in the EOS so it will be very overexposed and I don't know what dev time to give it, so it might not come out any good. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Back to top |
|
 |
TVR
 Joined: 19 Jan 2012 Posts: 97 Location: Brandon, MB
|
 Posted: Sat Feb 02, 2013 2:10 am Post subject: |
|
 Posted: Sat Feb 02, 2013 2:10 am Post subject: |
|
|
TVR wrote:
your Dad has a P 4 i spotted right away just picked up a 69 P6 TC great cars never had a ride in P4 i know where there is one for sale very tempting.........enough on cars at least cameras are cheaper and don't tale up as much room |
|
| Back to top |
|
 |
iangreenhalgh1
 Joined: 18 Mar 2011 Posts: 15679
Expire: 2014-01-07
|
 Posted: Tue Feb 12, 2013 12:01 pm Post subject: |
|
 Posted: Tue Feb 12, 2013 12:01 pm Post subject: |
|
|
iangreenhalgh1 wrote:
Yes, 1958 Rover P4 110, has a straight 6 with twin inch and 3/4 side-draught SUs, makes a glorious noise. What i like about it most is how you feel riding along in it, floating on those big soft cart springs, you feel like royalty.
Good luck with your new purchase, does she need a lot of work or is she already restored? _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Back to top |
|
 |
TVR
 Joined: 19 Jan 2012 Posts: 97 Location: Brandon, MB
|
 Posted: Tue Feb 12, 2013 10:35 pm Post subject: |
|
 Posted: Tue Feb 12, 2013 10:35 pm Post subject: |
|
|
TVR wrote:
here is my first TC a 68 we drove on the Bonneville Salt Flats it was so flat you can see the curvature of the earth
this my present car came from Victoria traded my TVR Tasmin for it just making new door panels and replacing some of the window rubber otherwise very presentable
 |
|
| Back to top |
|
 |
iangreenhalgh1
 Joined: 18 Mar 2011 Posts: 15679
Expire: 2014-01-07
|
 Posted: Tue Feb 12, 2013 10:54 pm Post subject: |
|
 Posted: Tue Feb 12, 2013 10:54 pm Post subject: |
|
|
iangreenhalgh1 wrote:
Those are very nice Rovers, they were common here at one time, I think the 2500 version was very commonly used by the police force. Don't they have bolt-on replaceable body panels? Good luck with the restoration, I know it requires patience. I'd love to visit Bonneville one day, preferably with a suitable car.  _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|