| View previous topic :: View next topic |
| Author |
Message |
dok
Joined: 03 Jun 2011 Posts: 34 Location: France
|
 Posted: Sun Nov 11, 2012 7:26 pm Post subject: 5D mark III and chipped adapters problem. |
|
 Posted: Sun Nov 11, 2012 7:26 pm Post subject: 5D mark III and chipped adapters problem. |
|
|
dok wrote:
I just got my very first FF camera, Canon 5D mark III, and was eager to try first some of my finest MF lenses.
I have 3 chipped adapter for M42 and 1 chipped adapter for C/Y. They work fine with my APSC Canon 450D. Sadly, on my 5D, 2 out 3 M42 adapters are giving a camera error "Err 01, clean your contacts..." and with my C/Y adapter the camera is switching to "lens firmware update mode", not allowing me to take a single picture. Annoying to say the least.
Has any of you had to deal with these problems ? Is there a solution (except waiting for a camera firmware update) or do I (just) need to find 5D markIII compatible adapters ? _________________ M42 : Fujinon EBC W 35 1.9; Fujinon EBC T 135 2.5; aus Jena DDR Pancolar electric MC 50 1.8; Jupiter 11A 135 4; Kaleinar 5H MC 100 2.8; Pentacon auto 29 2.8 MULTI COATING; Pentacon auto 29 2.8 MADE IN G.D.R.; Pentacon auto MC 135 2.8 (made in Japan!?); Helios 44-2 58 2; Helios 44-4 58 2; Helios 44-5 58 2; Carenar auto 55 1.4; Industar 50-2 50 3.5; Super Takumar 28 3.5; SMC Takumar 35 3.5; SMC Takumar 55 1.8; Sigma Mini-Tele MC 135 3.5; Pentacon 200 4
CONTAX : CZ Distagon 35 2.8; CZ Planar 50 1.7; Makinon 28 2.8 MC; Tamron 24 2.5. |
|
| Back to top |
|
 |
twinquartz
 Joined: 11 Jun 2012 Posts: 316 Location: Sweden
Expire: 2013-10-29
|
 Posted: Sun Nov 11, 2012 8:12 pm Post subject: |
|
 Posted: Sun Nov 11, 2012 8:12 pm Post subject: |
|
|
twinquartz wrote:
Salut!
Last time I encountered the Err 01-problem, I made it go away in this way:
a) turn off the camera.
b) take out the battery.
c) put program selector in M-mode.
d) insert battery.
e) turn on camera.
Will this work for you? |
|
| Back to top |
|
 |
dok
Joined: 03 Jun 2011 Posts: 34 Location: France
|
 Posted: Sun Nov 11, 2012 8:29 pm Post subject: |
|
 Posted: Sun Nov 11, 2012 8:29 pm Post subject: |
|
|
dok wrote:
Nope, not working. In your case, was this about regular EF lens or an adapter lens ?
Thanks nonetheless! _________________ M42 : Fujinon EBC W 35 1.9; Fujinon EBC T 135 2.5; aus Jena DDR Pancolar electric MC 50 1.8; Jupiter 11A 135 4; Kaleinar 5H MC 100 2.8; Pentacon auto 29 2.8 MULTI COATING; Pentacon auto 29 2.8 MADE IN G.D.R.; Pentacon auto MC 135 2.8 (made in Japan!?); Helios 44-2 58 2; Helios 44-4 58 2; Helios 44-5 58 2; Carenar auto 55 1.4; Industar 50-2 50 3.5; Super Takumar 28 3.5; SMC Takumar 35 3.5; SMC Takumar 55 1.8; Sigma Mini-Tele MC 135 3.5; Pentacon 200 4
CONTAX : CZ Distagon 35 2.8; CZ Planar 50 1.7; Makinon 28 2.8 MC; Tamron 24 2.5. |
|
| Back to top |
|
 |
twinquartz
 Joined: 11 Jun 2012 Posts: 316 Location: Sweden
Expire: 2013-10-29
|
 Posted: Sun Nov 11, 2012 8:58 pm Post subject: |
|
 Posted: Sun Nov 11, 2012 8:58 pm Post subject: |
|
|
twinquartz wrote:
Sorry it did not work for you.
My experience above was with an MF lens (a Helios 44M-4)
and a chipped adapter.
Personally, I prefer non-chipped adapters, but that probably
is a topic for another thread. |
|
| Back to top |
|
 |
dok
Joined: 03 Jun 2011 Posts: 34 Location: France
|
 Posted: Mon Nov 12, 2012 7:22 am Post subject: |
|
 Posted: Mon Nov 12, 2012 7:22 am Post subject: |
|
|
dok wrote:
Even though the viewfinder is nice in terms of size, for the moment I can't help but ask for a computer confirmation of a correct focus. Too scared to screw up a shot because I thought the focus was OK but actually wasn't. _________________ M42 : Fujinon EBC W 35 1.9; Fujinon EBC T 135 2.5; aus Jena DDR Pancolar electric MC 50 1.8; Jupiter 11A 135 4; Kaleinar 5H MC 100 2.8; Pentacon auto 29 2.8 MULTI COATING; Pentacon auto 29 2.8 MADE IN G.D.R.; Pentacon auto MC 135 2.8 (made in Japan!?); Helios 44-2 58 2; Helios 44-4 58 2; Helios 44-5 58 2; Carenar auto 55 1.4; Industar 50-2 50 3.5; Super Takumar 28 3.5; SMC Takumar 35 3.5; SMC Takumar 55 1.8; Sigma Mini-Tele MC 135 3.5; Pentacon 200 4
CONTAX : CZ Distagon 35 2.8; CZ Planar 50 1.7; Makinon 28 2.8 MC; Tamron 24 2.5. |
|
| Back to top |
|
 |
Aanything
 Joined: 27 Aug 2011 Posts: 2187 Location: Piacenza, Italy
Expire: 2014-05-30
|
 Posted: Mon Nov 12, 2012 7:48 am Post subject: |
|
 Posted: Mon Nov 12, 2012 7:48 am Post subject: |
|
|
Aanything wrote:
| dok wrote: |
| Even though the viewfinder is nice in terms of size, for the moment I can't help but ask for a computer confirmation of a correct focus. Too scared to screw up a shot because I thought the focus was OK but actually wasn't. |
Well, i wouldn't rely too much on focus confirm: in my experience with various cameras (not 5dIII, though) it is far from absolutely accurate, especially at wider apertures _________________ C&C and editing of my pics are always welcome
Samples from my lenses
My gear
My Flickr |
|
| Back to top |
|
 |
calvin83
 Joined: 12 Apr 2009 Posts: 7740 Location: Hong Kong
|
 Posted: Mon Nov 12, 2012 7:58 am Post subject: |
|
 Posted: Mon Nov 12, 2012 7:58 am Post subject: |
|
|
calvin83 wrote:
All the camera with DIGIT5 process seems have problem with old chip. Ask the seller for the support of the new camera before you bought it. _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| Back to top |
|
 |
dok
Joined: 03 Jun 2011 Posts: 34 Location: France
|
 Posted: Tue Nov 13, 2012 9:19 am Post subject: |
|
 Posted: Tue Nov 13, 2012 9:19 am Post subject: |
|
|
dok wrote:
| calvin83 wrote: |
| All the camera with DIGIT5 process seems have problem with old chip. Ask the seller for the support of the new camera before you bought it. |
That's exactly what I'm doing right now on my way to a new C/Y adapter. I bought the previous one when I only had my 450D. _________________ M42 : Fujinon EBC W 35 1.9; Fujinon EBC T 135 2.5; aus Jena DDR Pancolar electric MC 50 1.8; Jupiter 11A 135 4; Kaleinar 5H MC 100 2.8; Pentacon auto 29 2.8 MULTI COATING; Pentacon auto 29 2.8 MADE IN G.D.R.; Pentacon auto MC 135 2.8 (made in Japan!?); Helios 44-2 58 2; Helios 44-4 58 2; Helios 44-5 58 2; Carenar auto 55 1.4; Industar 50-2 50 3.5; Super Takumar 28 3.5; SMC Takumar 35 3.5; SMC Takumar 55 1.8; Sigma Mini-Tele MC 135 3.5; Pentacon 200 4
CONTAX : CZ Distagon 35 2.8; CZ Planar 50 1.7; Makinon 28 2.8 MC; Tamron 24 2.5. |
|
| Back to top |
|
 |
dok
Joined: 03 Jun 2011 Posts: 34 Location: France
|
 Posted: Tue Nov 13, 2012 9:23 am Post subject: |
|
 Posted: Tue Nov 13, 2012 9:23 am Post subject: |
|
|
dok wrote:
| Aanything wrote: |
Well, i wouldn't rely too much on focus confirm: in my experience with various cameras (not 5dIII, though) it is far from absolutely accurate, especially at wider apertures |
Well I used a lot the central focus point of my 450D and found it to be pretty accurate, actually. I think that when it didn't work out it was more because of the focus and recompose process (leading to loosing the exact focus point) than an unreliable focus confirmation.
Moreover until now many people are praising the MF possibilities of the 5DIII (via focus confirmation obviously because there's no real interchangeable screens). _________________ M42 : Fujinon EBC W 35 1.9; Fujinon EBC T 135 2.5; aus Jena DDR Pancolar electric MC 50 1.8; Jupiter 11A 135 4; Kaleinar 5H MC 100 2.8; Pentacon auto 29 2.8 MULTI COATING; Pentacon auto 29 2.8 MADE IN G.D.R.; Pentacon auto MC 135 2.8 (made in Japan!?); Helios 44-2 58 2; Helios 44-4 58 2; Helios 44-5 58 2; Carenar auto 55 1.4; Industar 50-2 50 3.5; Super Takumar 28 3.5; SMC Takumar 35 3.5; SMC Takumar 55 1.8; Sigma Mini-Tele MC 135 3.5; Pentacon 200 4
CONTAX : CZ Distagon 35 2.8; CZ Planar 50 1.7; Makinon 28 2.8 MC; Tamron 24 2.5. |
|
| Back to top |
|
 |
dok
Joined: 03 Jun 2011 Posts: 34 Location: France
|
 Posted: Tue Nov 13, 2012 9:38 pm Post subject: |
|
 Posted: Tue Nov 13, 2012 9:38 pm Post subject: |
|
|
dok wrote:
Just in case, there's a similar thread on fred miranda's forum : http://www.fredmiranda.com/forum/topic/1162911 _________________ M42 : Fujinon EBC W 35 1.9; Fujinon EBC T 135 2.5; aus Jena DDR Pancolar electric MC 50 1.8; Jupiter 11A 135 4; Kaleinar 5H MC 100 2.8; Pentacon auto 29 2.8 MULTI COATING; Pentacon auto 29 2.8 MADE IN G.D.R.; Pentacon auto MC 135 2.8 (made in Japan!?); Helios 44-2 58 2; Helios 44-4 58 2; Helios 44-5 58 2; Carenar auto 55 1.4; Industar 50-2 50 3.5; Super Takumar 28 3.5; SMC Takumar 35 3.5; SMC Takumar 55 1.8; Sigma Mini-Tele MC 135 3.5; Pentacon 200 4
CONTAX : CZ Distagon 35 2.8; CZ Planar 50 1.7; Makinon 28 2.8 MC; Tamron 24 2.5. |
|
| Back to top |
|
 |
mackeral
 Joined: 21 Oct 2012 Posts: 64 Location: United States
|
 Posted: Wed Nov 14, 2012 6:17 am Post subject: |
|
 Posted: Wed Nov 14, 2012 6:17 am Post subject: |
|
|
mackeral wrote:
I'm having the same issue with the T4i. I'm thinking it's the newer models. I posted a topic on here but didn't get much feedback. |
|
| Back to top |
|
 |
hinnerker
 Joined: 17 Aug 2009 Posts: 929 Location: Germany near Kiel
Expire: 2015-08-09
|
 Posted: Wed Nov 14, 2012 8:50 am Post subject: |
|
 Posted: Wed Nov 14, 2012 8:50 am Post subject: |
|
|
hinnerker wrote:
| calvin83 wrote: |
| All the camera with DIGIT5 process seems have problem with old chip. Ask the seller for the support of the new camera before you bought it. |
+1
The same i experienced after upgrading from old 5D to 5D MKII.. none of my old adaptors with chip did work on 5D MKII.. !
After buying new ones from seller everything was fine..
Cheers
Henry _________________ some light-painting lens stuff..
... and an EOS 5D MKII
www.digicamclub.de |
|
| Back to top |
|
 |
dok
Joined: 03 Jun 2011 Posts: 34 Location: France
|
 Posted: Thu Jan 17, 2013 8:33 am Post subject: |
|
 Posted: Thu Jan 17, 2013 8:33 am Post subject: |
|
|
dok wrote:
Guys,
Apparently adapters for 5D mark iii seem to appear.
here's one for C/Y contax yashica : http://cgi.ebay.fr/3nd-AF-Confirm-Contax-Yashica-CY-Lens-to-Canon-EOS-Adapter-For-5D-mark-III-650D-/370713596463?pt=US_Lens_Adapters_Mounts_Tubes&hash=item565040922f
EDIT : There's more !
http://stores.ebay.fr/camplus-shop/3rd-AF-Confirm-Adapter-/_i.html?LH_TitleDesc=1&_nkw=5D+mark+III&_fsub=575551419&_sid=654376679&_trksid=p4634.c0.m322
(I have no interest in this seller, it's just the only one I found). _________________ M42 : Fujinon EBC W 35 1.9; Fujinon EBC T 135 2.5; aus Jena DDR Pancolar electric MC 50 1.8; Jupiter 11A 135 4; Kaleinar 5H MC 100 2.8; Pentacon auto 29 2.8 MULTI COATING; Pentacon auto 29 2.8 MADE IN G.D.R.; Pentacon auto MC 135 2.8 (made in Japan!?); Helios 44-2 58 2; Helios 44-4 58 2; Helios 44-5 58 2; Carenar auto 55 1.4; Industar 50-2 50 3.5; Super Takumar 28 3.5; SMC Takumar 35 3.5; SMC Takumar 55 1.8; Sigma Mini-Tele MC 135 3.5; Pentacon 200 4
CONTAX : CZ Distagon 35 2.8; CZ Planar 50 1.7; Makinon 28 2.8 MC; Tamron 24 2.5. |
|
| Back to top |
|
 |
sandokan
Joined: 27 Apr 2011 Posts: 7
|
 Posted: Sat Mar 30, 2013 9:10 am Post subject: |
|
 Posted: Sat Mar 30, 2013 9:10 am Post subject: |
|
|
sandokan wrote:
Hi,
Can you confirm if the chipped adaptors for the mark3 light up the individual focus points as you scan focus through them?
Does that make sense? I tried a friend's 7D and the points lit up indivdually so allowing me to compuse first, focus with the point at the right area I wanted to focus on and then take the shot without moving too much.
Thanks
Ravi
============
PS - I think I found the answer.
Selecting 61 Point Automatic Selection AF activates all points simultaneously and any that are in focus will light up. |
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|