MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Pentax ME super question
View previous topic :: View next topic  


Reply

I have a Pentax ME super with a damaged splitscreen/ground glass which needs changing. I do have a Ricoh KR-10 Super which has an idenical looking ground glass that I could use. However one thing is bothering me. I`m not sure if the shutter speed scale is written on the pentaprism or the ground glass. If so the only donor I could use is another pentax ME super, but if not I could easily use the Ricoh that I have. Does someone have any info an this?


Reply

Drack wrote:
I have a Pentax ME super with a damaged splitscreen/ground glass which needs changing. I do have a Ricoh KR-10 Super which has an idenical looking ground glass that I could use. However one thing is bothering me. I`m not sure if the shutter speed scale is written on the pentaprism or the ground glass. If so the only donor I could use is another pentax ME super, but if not I could easily use the Ricoh that I have. Does someone have any info an this?

I think probably neither. I've never had an ME-Super apart but the K2 has a scale similar to the ME-S, except it has a mechanical needle, not LEDs. The scale is printed on a clear plastic tab between the screen and the prism.

It's a tricky job to replace the screen, you can't do it from underneath. You have to first remove the prism and its electronic components.


Reply

peterqd wrote:
Drack wrote:
I have a Pentax ME super with a damaged splitscreen/ground glass which needs changing. I do have a Ricoh KR-10 Super which has an idenical looking ground glass that I could use. However one thing is bothering me. I`m not sure if the shutter speed scale is written on the pentaprism or the ground glass. If so the only donor I could use is another pentax ME super, but if not I could easily use the Ricoh that I have. Does someone have any info an this?

I think probably neither. I've never had an ME-Super apart but the K2 has a scale similar to the ME-S, except it has a mechanical needle, not LEDs. The scale is printed on a clear plastic tab between the screen and the prism.

It's a tricky job to replace the screen, you can't do it from underneath. You have to first remove the prism and its electronic components.

Really? Than I might be in luck. I have seen the instructions how to remove the top plate and find your way near the ground glass It`s fairly easy.


Reply

I found this image Pentaxforums.

The left side shows the speed scale and does not appear to be part of the focusing screen.

Regards.