| View previous topic :: View next topic |
| Author |
Message |
guardian
 Joined: 18 Mar 2009 Posts: 1750
|
 Posted: Sat Jan 05, 2013 8:29 pm Post subject: Blackening aluminum (aluminium) |
|
 Posted: Sat Jan 05, 2013 8:29 pm Post subject: Blackening aluminum (aluminium) |
|
|
guardian wrote:
What are you doing about mild "brassing". I brought in a MF lens yesterday that is not too bad, but it needs a bit of touch-up around the front where a very narrow band of black anodizing is worn off and the color is showing "silver", which is really just aluminum.
Has anyone found an easy way, or at least a straightforward way, to re-blacken such a piece? Re-anodizing is not especially practical at this point because of the need for disassembly . . . . and besides it's a very small part.
Is anyone doing anodizing at home?
If not, how do you deal with "brassing"?  |
|
| Back to top |
|
 |
Esox lucius
 Joined: 26 Aug 2008 Posts: 2441 Location: Helsinki, Finland
Expire: 2011-11-18
|
 Posted: Sat Jan 05, 2013 10:39 pm Post subject: Re: Blackening aluminum (aluminium) |
|
 Posted: Sat Jan 05, 2013 10:39 pm Post subject: Re: Blackening aluminum (aluminium) |
|
|
Esox lucius wrote:
| guardian wrote: |
If not, how do you deal with "brassing"?  |
I don't. I think it's good that lenses show they've seen use, that way I won't be mistaken for a shelf collector when I'm out photographing with it
Vilhelm |
|
| Back to top |
|
 |
Jesito
 Joined: 24 Aug 2007 Posts: 5745 Location: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Posted: Sat Jan 05, 2013 11:39 pm Post subject: |
|
 Posted: Sat Jan 05, 2013 11:39 pm Post subject: |
|
|
Jesito wrote:
For small scratches, I use just black permanent maker. It gives good results. The thin layer over the scratches avoids the paint to conrtnue peeling off, and tha black colour gets similar to the original giving a better look. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Back to top |
|
 |
NewStuff
 Joined: 31 Mar 2011 Posts: 847 Location: Wales, UK
|
 Posted: Sat Jan 05, 2013 11:47 pm Post subject: |
|
 Posted: Sat Jan 05, 2013 11:47 pm Post subject: |
|
|
NewStuff wrote:
I suspect I'm in the minority here, but as long as the Optics and Mechanics of the lens are fine, then I don't care at all how it looks. I'd rather have a cheaper but tatty looking lens than a pristine version. If it's good, chances are it will end up underground, and it most certainly won't be pristine after that!
Oh, ok then, maybe just a little... "almost dead" is my preferred look because it annoys the hell out of people who like to polish lenses, but don't use them, and partly because it show that either myself, or the previous owner just couldn't take it off the pointy side of the camera. _________________ Too many to list. |
|
| Back to top |
|
 |
peterqd
 Joined: 28 Feb 2007 Posts: 7449 Location: near High Wycombe, UK
Expire: 2014-01-04
|
 Posted: Sun Jan 06, 2013 1:57 am Post subject: |
|
 Posted: Sun Jan 06, 2013 1:57 am Post subject: |
|
|
peterqd wrote:
| NewStuff wrote: |
I suspect I'm in the minority here, but as long as the Optics and Mechanics of the lens are fine, then I don't care at all how it looks. I'd rather have a cheaper but tatty looking lens than a pristine version. If it's good, chances are it will end up underground, and it most certainly won't be pristine after that!
Oh, ok then, maybe just a little... "almost dead" is my preferred look because it annoys the hell out of people who like to polish lenses, but don't use them, and partly because it show that either myself, or the previous owner just couldn't take it off the pointy side of the camera. |
+1
I distrust a lens in pristine condition. It means it hasn't been used very much, which raises doubts that it is OK. I've had a few mint lenses that weren't. _________________ Peter - Moderator |
|
| Back to top |
|
 |
guardian
 Joined: 18 Mar 2009 Posts: 1750
|
 Posted: Sun Jan 06, 2013 2:05 am Post subject: |
|
 Posted: Sun Jan 06, 2013 2:05 am Post subject: |
|
|
guardian wrote:
| Jesito wrote: |
| For small scratches, I use just black permanent maker. It gives good results. The thin layer over the scratches avoids the paint to conrtnue peeling off, and tha black colour gets similar to the original giving a better look. |
Appreciate the suggestion. Thank you. Your's is also most likely a safe approach. I posted here, on this repair board, with the hope of receiving helpful suggestions and ideas, like yours, to address the problem I'm facing.
My issue is more "brassing", though, than scratches. Still, a permanent marker might work. A bit of experimentation is probably in order to determine the best type.
I have looked at the home anodizing process. Seems to me, though, it would be rather like using a shotgun to kill a mouse. This is to say nothing of the lens disassembly required and the stripping dangers regarding dimensions. |
|
| Back to top |
|
 |
NewStuff
 Joined: 31 Mar 2011 Posts: 847 Location: Wales, UK
|
 Posted: Sun Jan 06, 2013 8:33 am Post subject: |
|
 Posted: Sun Jan 06, 2013 8:33 am Post subject: |
|
|
NewStuff wrote:
Home anodizing is fairly easy, and it's not that hard to get hold of the equipment, but it does consume a fair amount of electricity. You would need to strip the lens back to bare metal first, all paint should be removed, so aperture and focus marking etc would be lost. _________________ Too many to list. |
|
| Back to top |
|
 |
ZoneV
 Joined: 09 Nov 2009 Posts: 1633 Location: Germany
Expire: 2011-12-02
|
 Posted: Tue Jan 22, 2013 11:04 am Post subject: |
|
 Posted: Tue Jan 22, 2013 11:04 am Post subject: |
|
|
ZoneV wrote:
Home anodizing - whow, sounds great. But the price for chemicals and equipment and power would be too much for me. I better buy a small mill
| NewStuff wrote: |
| I suspect I'm in the minority here, but as long as the Optics and Mechanics of the lens are fine, then I don't care at all how it looks. I'd rather have a cheaper but tatty looking lens than a pristine version. ... |
You are not alone
I even like to buy lenses with fungus, to try to clean it away. Or with mechanical defects which I probably able to repair. _________________ Camera modification, repair and DIY - some links to look through: http://www.4photos.de/camera-diy/index-en.html
I AM A LENS NERD!
Epis, Elmaron, Emerald, Ernostar, Helioplan and Heidosmat.
Epiotar, Kameraobjektiv, Anastigmat, Epis, Meganast, Magnagon, Quinar, Culmigon, Novotrinast, Novflexar, Colorplan, Sekor, Kinon, Talon, Telemegor, Xenon, Xenar, Ultra, Ultra Star. Tessar, Janar, Visionar, Kiptar, Kipronar and Rotelar.
|
|
| Back to top |
|
 |
Jesito
 Joined: 24 Aug 2007 Posts: 5745 Location: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Posted: Tue Jan 22, 2013 11:49 am Post subject: |
|
 Posted: Tue Jan 22, 2013 11:49 am Post subject: |
|
|
Jesito wrote:
Also an alternative is to use enamel paint, a bit thinned with solvent, like Humbrol or Tamiya.
In some cases I've been able to paint parts of a camera body with an aerograph and that kind of enamel. But it needs also some disassembly. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Back to top |
|
 |
Lloydy
 Joined: 02 Sep 2009 Posts: 7880 Location: Ironbridge. UK.
Expire: 2022-01-01
|
 Posted: Tue Jan 22, 2013 5:48 pm Post subject: |
|
 Posted: Tue Jan 22, 2013 5:48 pm Post subject: |
|
|
Lloydy wrote:
I use Tamiya acrylic, which is water and solvent soluble. The 'Semi Gloss Black X-18' is a good match for most cameras. It dries very quickly as well. I use it unthinned, and when it is touch dry I rub the new paint gently with my finger and that smooths any brush marks, blends the new paint to the old, and flattens the finish a bit - if it needs it. On scratched camera backs, along the hinge, etc, I have done invisible small repairs.
It comes in small 10ml bottles form model suppliers, the acrylic thinner is product number X-20A. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Back to top |
|
 |
guardian
 Joined: 18 Mar 2009 Posts: 1750
|
 Posted: Wed Jan 23, 2013 12:21 pm Post subject: |
|
 Posted: Wed Jan 23, 2013 12:21 pm Post subject: |
|
|
guardian wrote:
| Lloydy wrote: |
I use Tamiya acrylic, which is water and solvent soluble. The 'Semi Gloss Black X-18' is a good match for most cameras. It dries very quickly as well. I use it unthinned, and when it is touch dry I rub the new paint gently with my finger and that smooths any brush marks, blends the new paint to the old, and flattens the finish a bit - if it needs it. On scratched camera backs, along the hinge, etc, I have done invisible small repairs.
It comes in small 10ml bottles form model suppliers, the acrylic thinner is product number X-20A. |
Thanks for the excellent tip.
It's interesting you choose to use semi-gloss. I'm not sure I would have thought of that. But I should have!  |
|
| Back to top |
|
 |
|
|