MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Agfa Copex HDP13 in Kodak Microdol-X part 5
View previous topic :: View next topic  


Reply

Fifth attempt, same EOS 10qd and Micro-Nikkor 3.5/55 as before, again exposed at ISO 25 and developed in 1:3 Microdol-X. Only difference this time was a reduction in development time from 20mins to 18mins.

These were shot at around 3.30pm as snow was falling, the light was the worst possible, by any normal rationale, a useless situation for any kind of photography. Well, even though I had to make some exposures of 30secs at f3.5, I think the results are astonishing given the lack of light.

#1

#2

#3

#4

#5

#6

#7


Reply

Not really come throw in small jpg , how sharp , how no grain I see #4 in big, I was amazed , well done Ian!


Reply

Cheers Smile

I've had this Micro-Nikkor for over a year and not used it much before, I'm coming rapidly to love it, just a great lens, I think I paid 30ukp for it, which I consider a big bargain considering it's abilities.


Reply

Here's a 100% crop from #4. Grain is pretty much invisible and the sharpness exceeds what my scanner can record, the scanner can do 70lp/mm max, but the lens and film can record probably twice that figure, maybe a little more. This was a 30 second exposure at f5.6, seems my Velbon tripod is pretty stable and the mirror damping in the EOS 10qd is pretty good because I see no shake, there was no wind either, luckily.



Reply

Best results by far, well done! Cool


Reply

Cheers Bill, I was overdeveloping by a lot before, which made them very hard to scan and get nice tonality, even this roll looked too dense so I'll try to reduce the development time further.