| View previous topic :: View next topic |
| Author |
Message |
iangreenhalgh1
 Joined: 18 Mar 2011 Posts: 15679
Expire: 2014-01-07
|
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Thu Jan 17, 2013 7:37 pm Post subject: |
|
 Posted: Thu Jan 17, 2013 7:37 pm Post subject: |
|
|
Attila wrote:
You got great success, #10 may best to me. |
|
| Back to top |
|
 |
iangreenhalgh1
 Joined: 18 Mar 2011 Posts: 15679
Expire: 2014-01-07
|
 Posted: Thu Jan 17, 2013 7:39 pm Post subject: |
|
 Posted: Thu Jan 17, 2013 7:39 pm Post subject: |
|
|
iangreenhalgh1 wrote:
Thankyou. They vary a bit due to differing light, #10 was in direct light, some are in poor light so tonality suffers. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Back to top |
|
 |
inombrable
 Joined: 20 Mar 2012 Posts: 545 Location: Salamanca, Mexico
|
 Posted: Thu Jan 17, 2013 8:51 pm Post subject: |
|
 Posted: Thu Jan 17, 2013 8:51 pm Post subject: |
|
|
inombrable wrote:
Ten looks very nice
The roll seems to be in good condition! |
|
| Back to top |
|
 |
skida
 Joined: 02 Mar 2012 Posts: 1826 Location: North East England
|
 Posted: Thu Jan 17, 2013 11:13 pm Post subject: |
|
 Posted: Thu Jan 17, 2013 11:13 pm Post subject: |
|
|
skida wrote:
That must have been stored at or very near zero degrees Kelvin! The film doesn't give the results I would expect after 20 years. 7 and 10 are my standouts. |
|
| Back to top |
|
 |
Excalibur
 Joined: 19 Jul 2009 Posts: 5018 Location: UK
Expire: 2014-04-21
|
 Posted: Thu Jan 17, 2013 11:43 pm Post subject: |
|
 Posted: Thu Jan 17, 2013 11:43 pm Post subject: |
|
|
Excalibur wrote:
| skida wrote: |
| That must have been stored at or very near zero degrees Kelvin! The film doesn't give the results I would expect after 20 years. 7 and 10 are my standouts. |
I've got FP4 35mm bulk and 120 stored at room temp dated about 1982 and it's still ok...I dev some 120 last year after a gap of about 20 years and the results aren't too bad using promicrol, with better skill it would have been better
About 1982 FP4, RB67 taken in 2011
 _________________ Canon A1, AV1, T70 & T90, EOS 300 and EOS300v, Chinon CE and CP-7M. Contax 139, Fuji STX-2, Konica Autoreflex TC, FS-1, FT-1, Minolta X-700, X-300, XD-11, SRT101b, Nikon EM, FM, F4, F90X, Olympus OM2, Pentax S3, Spotmatic, Pentax ME super, Praktica TL 5B, & BC1, , Ricoh KR10super, Yashica T5D, Bronica Etrs, Mamiya RB67 pro AND drum roll:- a Sony Nex 3
.........past gear Tele Rolleiflex and Rollei SL66.
Many lenses from good to excellent. |
|
| Back to top |
|
 |
iangreenhalgh1
 Joined: 18 Mar 2011 Posts: 15679
Expire: 2014-01-07
|
 Posted: Thu Jan 17, 2013 11:45 pm Post subject: |
|
 Posted: Thu Jan 17, 2013 11:45 pm Post subject: |
|
|
iangreenhalgh1 wrote:
Thanks guys. I got lucky, the tin is rusty but was still sealed from the factory, no idea of storage but it does look like it's working fine. Not sure if it has lost any speed, I rate films at half speed for a broader tonal range and I think that would kinda mask any speed loss unless it was major. That's four old bulk rolls of FP4/FP4+ I've bought now, all worked fine. I bought a roll that turned out to be some mystery kodak and didn't work at all, no matter how much I exposed it and developed it I got very faint images but the clear letters 'Kodak Safety Film' on the edges, no identifying code, it seems to have lost all speed. I bought a roll of HP5 too and that is garbage, lost a couple of stops of speed and has a high base fog level so results are grainy and have ugly tonality. It's a bit of a gamble buying these old rolls, but I only buy if they are dirt cheap. Now I have about 500ft of fp4/fp4+ to use, should keep me going a while. Just picked up a 100ft roll of 1997 expired tmax 100, need to try that next. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|