MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Halo mark on lens -- haze/fungus/separation/other?
View previous topic :: View next topic  


Reply

My Soligor 28mm 2.8 T4 looks clean on this picture:



But when out in the sun and taken at the right angle it shows a ring affecting the outer edge of the lens:



I initially thought it was on the outside surface and tried a quick clean with a clean dry t-shirt rag but discovered it's on an inner surface. Shining a light from the back of the lens does not show this at all--the only way to see it is by having light reflect off the artifact from the front.

If this is something that can be addressed is it worth the effort to open it up to fix?

Took test pics and don't know if softness towards edges are enough to be annoyed about. I can post here if requested.

Thanks...

~Serge


Reply

I'm thinking "separation". Sad


Reply

It might be condensation marks. Maybe this lens has received moisture before which dried out and left this residue ?