MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

A question about cannisters for home loading 35mm film
View previous topic :: View next topic  


Reply

I've recently started buying bulk 35mm b&w film for home loading. I've also invested in some plastic screwtop barfen film cannisters and pop-top recycleable metal ones.

The old boys at the shop which develops my film are poo-pooing these metal ones and are, in fact, suggesting simply taping my film onto the captive leader on "ordinary" film canisters, providing me with a handful and offers of "as many as you like". Laughing

The ones they've given me have only a very short leader, say 5mm, sticking out of the cannister and I'm wondering about the feasibility of finding an adhesive tape thin enough to pass through the slot (currently I use paper-based masking tape) and sticky enough to hold on with just a few mm's of overlap. And, of course, the fun of doing that in the dark!


What do you guys use please?


Reply

I use a bottle opener to open the metal canisters then reload them, removing any remaining film and taping direct to the spool. I have some barfen reloadables too, I use them as well. Both work, reloadables are a bit easier.


Reply

Simple canister sometimes fall off, better to fix immediately with tape on light. Use bulk loader much easier than make crap in dark..

Old canisters like Orwo Agfa, Fortepan are reloadable, ORWO is one of the most handy due plastic and it has little screw simple open and close. I use many of them.


Reply

Attila wrote:
Simple canister sometimes fall off, better to fix immediately with tape on light. Use bulk loader much easier than make crap in dark..

Old canisters like Orwo Agfa, Fortepan are reloadable, ORWO is one of the most handy due plastic and it has little screw simple open and close. I use many of them.


Yes, I a bulk loader but there's still the part of the process involving connecting film stock to cannister and then cutting the loaded film from the bulk reel all of which, being a beginner, I prefer to do in the dark Laughing


Reply

I use empty used canister from the lab, which have last part of film left to stitch bulk film to it with glue tape. I use canisters only once, because it is pretty easy to accces loads of them and thus there is no problem with dust.


Reply

Some times I still use my Pentax re-usable cassette after 45 years, but if you can get the older cassettes they were easier to take the top off and to replace after loading the film.....the new cassettes are more difficult to take the top off or maybe I've got weaker as I've got older Wink