| View previous topic :: View next topic |
| Author |
Message |
ZoneV
 Joined: 09 Nov 2009 Posts: 1633 Location: Germany
Expire: 2011-12-02
|
 Posted: Tue Mar 22, 2011 4:26 pm Post subject: Thin manual extension tube for Canon EF - DIY |
|
 Posted: Tue Mar 22, 2011 4:26 pm Post subject: Thin manual extension tube for Canon EF - DIY |
|
|
ZoneV wrote:
I wanted a thinner extension tube for some of my lenses.
I made one with M42, but some lenses are now with "native" EF mount, and needs an EF extension tube.
For example for lenses with 40 to 85 mm the enormal 12 mm extension tubes are sometimes too long.
Especially for my converted FD 85/1.2L I want a shorter tube, to work more with a better floating element position.
I used a cheap manual extension tube set bought at Ebay.
These are in the shortest combination 15 mm long.
Disassembled it:
And with a mini lathe I made the parts shorter. I got 8 mm length (not overall with mount).
With an other locking pin assemlby - like in cheaper Nikon-F lens to EF-mount adapters even shorter should be possible. But the screws for the lens side mount still need some metal to hold!
First test with a Canon EF 50/1.4
Why a AF lens? Because the lens is well known - and not too heavy. This photo was made with the camera mount part only plugged, no srews, no glue.
Afterwards I used some glue for that mount part.
You think glue is bad? Not good for the bigger lenses?
I tried my EF converted Canon FD 300mm f/2.8L with that glued ring on an EOS 500n (with plastic mount). I hold the camera, and the lens hanged on the adapter - no problem.
I even dared to hold this combination horizontal - and held only the camera body.
That seems to much for some of the AF users with a metal mount EOS 40D or even better - with the much lighter EF 70-200mm f/2.8 L as I read in some photo threads. They don´t dare to hold their camera with the lens hanging on the camera mount..
More on my website:
http://www.4photos.de/camera-diy/Short-Extension-Tube.html _________________ Camera modification, repair and DIY - some links to look through: http://www.4photos.de/camera-diy/index-en.html
I AM A LENS NERD!
Epis, Elmaron, Emerald, Ernostar, Helioplan and Heidosmat.
Epiotar, Kameraobjektiv, Anastigmat, Epis, Meganast, Magnagon, Quinar, Culmigon, Novotrinast, Novflexar, Colorplan, Sekor, Kinon, Talon, Telemegor, Xenon, Xenar, Ultra, Ultra Star. Tessar, Janar, Visionar, Kiptar, Kipronar and Rotelar.
|
|
| Back to top |
|
 |
calvin83
 Joined: 12 Apr 2009 Posts: 7740 Location: Hong Kong
|
 Posted: Wed Mar 23, 2011 4:21 am Post subject: |
|
 Posted: Wed Mar 23, 2011 4:21 am Post subject: |
|
|
calvin83 wrote:
Good DIY tutorial.
The thinnest 3rd party extension tube I ever see is 12mm. This one is 4mm thinner. _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| Back to top |
|
 |
cooltouch
 Joined: 15 Jan 2009 Posts: 9096 Location: Houston, Texas
|
 Posted: Wed Mar 23, 2011 4:36 am Post subject: |
|
 Posted: Wed Mar 23, 2011 4:36 am Post subject: |
|
|
cooltouch wrote:
What do you do for the electrical contacts for the EF lenses, so that the lens knows how far to open its aperture? Because the EF lenses have no aperture ring, it seems to me you would still need to install the contacts so this communication can still occur. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| Back to top |
|
 |
ZoneV
 Joined: 09 Nov 2009 Posts: 1633 Location: Germany
Expire: 2011-12-02
|
 Posted: Wed Mar 23, 2011 8:15 am Post subject: |
|
 Posted: Wed Mar 23, 2011 8:15 am Post subject: |
|
|
ZoneV wrote:
| cooltouch wrote: |
| What do you do for the electrical contacts for the EF lenses, so that the lens knows how far to open its aperture? ... |
This extension tube is manual - see text and title.
So I did not care about the electrical contacts.
I made this tube for all my full manual lenses with EF mount like the Minolta Rokkor 58/1.2 and Canon FD 85/1.2L and others.
For an automatic tube with electrical contacts it would be harder. Best would be to slaugther an expensive automatic tube. But in some (or all?) of them the contacs on one side are spring loaded, and that sometimes need a bigger depth.
Another option is to make the contact ridge at your own, with short springs or something like that. Or take these from an EF lens and an EF camera. But it is not easy to set them on the right position (for the lens side). Best would be to twist the normal lens position some ~45° to have no trouble with both contact ridges.
I think about one of the last options - probably for a bellows or extension tube - but priority is low - use 95-99.99 % of time manual lenses.
I have a 12 mm automatic extension tube. But that is sometimes to thick.
8 mm is much better, but I probabyl try to make it even shorter to 6 mm thickness. _________________ Camera modification, repair and DIY - some links to look through: http://www.4photos.de/camera-diy/index-en.html
I AM A LENS NERD!
Epis, Elmaron, Emerald, Ernostar, Helioplan and Heidosmat.
Epiotar, Kameraobjektiv, Anastigmat, Epis, Meganast, Magnagon, Quinar, Culmigon, Novotrinast, Novflexar, Colorplan, Sekor, Kinon, Talon, Telemegor, Xenon, Xenar, Ultra, Ultra Star. Tessar, Janar, Visionar, Kiptar, Kipronar and Rotelar.
|
|
| Back to top |
|
 |
ZoneV
 Joined: 09 Nov 2009 Posts: 1633 Location: Germany
Expire: 2011-12-02
|
 Posted: Tue Jan 22, 2013 3:36 pm Post subject: |
|
 Posted: Tue Jan 22, 2013 3:36 pm Post subject: |
|
|
ZoneV wrote:
Nearly two years later:
Now I have made a manual 6mm thin Canon extension tube - page at the moment only in German language.
First experiments to get full EF compatiblity are good. Seems that next prototype of the contact block could give me good enough reliability to use it in real life test.
At the moment I jiggle the mount till the contacts are correct alingend, and the lens works with AF and iris function. At the moment the contact block is glued to a test lens, when I have the new prototype I think I could screw it to the extension tube.
And then I could glue or screw the extension ring together - at the moment it is only pressed together - small enough tolerances to hold 600g Distagon when I forget the ring is still not glued.
I went the way to build own contact block. And I did not need to rotate the extension ring front and back for these 6.0 mm thickness. _________________ Camera modification, repair and DIY - some links to look through: http://www.4photos.de/camera-diy/index-en.html
I AM A LENS NERD!
Epis, Elmaron, Emerald, Ernostar, Helioplan and Heidosmat.
Epiotar, Kameraobjektiv, Anastigmat, Epis, Meganast, Magnagon, Quinar, Culmigon, Novotrinast, Novflexar, Colorplan, Sekor, Kinon, Talon, Telemegor, Xenon, Xenar, Ultra, Ultra Star. Tessar, Janar, Visionar, Kiptar, Kipronar and Rotelar.
|
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|