MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Turret finder
View previous topic :: View next topic  


Reply

I finally managed to pick up a turret viewfinder for my FED2 at a reasonable price. Unfortunately, it just slides out of the "cold" shoe on the camera. Should there be some sort of spring fixing? Or am I going to have to make some shims to keep it in place?

Thanks, Kris.


Reply

. . . or bend the accessory shoe tabs a little Very Happy

Did you get the Russian turret finder? I've had several of those over the years and it's always seemed to me that their 'feet' are slightly too long and too narrow for many camera shoes. They're often a loose fit laterally even in the ones with spring-loaded tabs.


Reply

scsambrook wrote:
. . . or bend the accessory shoe tabs a little Very Happy

Did you get the Russian turret finder? I've had several of those over the years and it's always seemed to me that their 'feet' are slightly too long and too narrow for many camera shoes. They're often a loose fit laterally even in the ones with spring-loaded tabs.


Yes, one of the Soviet ones. Just falls straight off at the moment. Sad

K.


Reply

Time to get the toffee hammer out !


Reply

Thanks everyone. I'll try a little felt before I take a hammer to my FED! Wink

Best wishes, Kris.


Reply

My KMZ finder is really tight in my Zorki/FEDs. You probably have a `special' one. The joy of FSU cameras. lol


Reply

I wonder how common it is for them to be loose? I have been giving some thought to getting one. When you can keep it in, how do you like it?


Reply

Hi Kris,

I've had similar issues with both turret finders and other finders/exposure meters.

While this will not work with the Fed 2 due to the recessed cold shoe, I find that on cold shoes that stand clear of the rest of the top cover, using a black "O" ring works well.

Make sure the "O" is smaller than the cold shoe, then stretch it over the shoe so that the rear of the cold shoe is now obstructed by the ring. The finder can then be slid into the shoe by stretching the ring away from the opening. Once the finder is in, the ring will snap back into place, thus closing the rear of the cold shoe.

This works especially well with my Kiev 4a and Kodalux L meter.

Hope this helps someone in similar situations


Reply

martinsmith99 wrote:
My KMZ finder is really tight in my Zorki/FEDs. You probably have a `special' one. The joy of FSU cameras. lol


+1


Reply

womble wrote:
Thanks everyone. I'll try a little felt before I take a hammer to my FED! Wink

Don't you have matches and a small knife in your pocket?? Shocked