MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

36,4mm - C-Mount Adapter? :( Short T-Mount Adapter?
View previous topic :: View next topic  


Reply

I need an 36,4mm x 1mm "Vixen Scewmount" to C-Mount or a similar to get my Sony NEX working on my new pretty extreme Celestron 500mm/F3.6 Schmidt-Newton mirror lens.

I was able to find an from 36,4mm to 42mm T-Mount for 20€
http://www.teleskop-express.de/shop/product_info.php/info/p577_Adapter--M36-4-aussen---T2-aussen---Fokaladapter-fuer-Vixen.html

The problem is that the T-Mount-NEX adapters are too long.

The only solution I was able to find right yet was to buy an NEX-52mm reversed lens adapter (10€), an 52mm-->48mm reducer (5€), an 48mm - T2 adapter (20€) and the 36,4mm - T-Mount (20€)

That would be 55€ for an 4x stacked adapter.

Has anyone a better idea for or an more dressy solution? Maybe were to find an short T-Mount-NEX adapter etc.?


Reply

If helpful I have T2-C-mount adapter you can have for shipping cost:







Reply

ForenSeil wrote:
I need an 36,4mm x 1mm "Vixen Scewmount" to C-Mount or a similar to get my Sony NEX working on my new pretty extreme Celestron 500mm/F3.6 Schmidt-Newton mirror lens.

I was able to find an from 36,4mm to 42mm T-Mount for 20€
http://www.teleskop-express.de/shop/product_info.php/info/p577_Adapter--M36-4-aussen---T2-aussen---Fokaladapter-fuer-Vixen.html

The problem is that the T-Mount-NEX adapters are too long.

The only solution I was able to find right yet was to buy an NEX-52mm reversed lens adapter (10€), an 52mm-->48mm reducer (5€), an 48mm - T2 adapter (20€) and the 36,4mm - T-Mount (20€)

That would be 55€ for an 4x stacked adapter.

Has anyone a better idea for or an more dressy solution? Maybe were to find an short T-Mount-NEX adapter etc.?


The problem isn't that the T-Mount-NEX adapter is too long, but the 36,4 to T-Mount adapter is. The T-mount is supposed to be 55mm away from the film/sensor. Any normal T-mount adapter, be it to NEX or C-mount, will be designed to reach that 55mm flange distance. If the T-NEX adapter doesn't work for you, nor will any other standard T adapter.

Can you determine how thick you need your adapter from T-mount to NEX to be for your setup?

The standard T-NEX adapter should be (55-18=) 37mm thick. If you go with a combination of adapters as you mention above you'll end up with a fixed length that should be shorter than that 37mm. One other way is connecting a M42 adapter to the Vixen-T-adapter. Normally it isn't recommended to mix T-mount and M42 as they are both 42mm in diameter but different in speed, 0.75 versus 1.0mm. But jamming a m42 into a T mount results in a very solid connection. A normal M42 to NEX adapter is (45.5-18=) 27.5mm thick. If that is narrow enough for you I'd recommend a m42-NEX adapter with a rotating mount, so you can adjust the angle of the camera wrt the lens, like this one:

Click here to see on Ebay.de

If you need less than 27.5mm you can try a helicoid focussing m42-NEX adapter, with a minimum thickness of 13mm:
Click here to see on Ebay.de

If you need even less thickness, I've seen a few 2-3mm thick M42-NEX adapters once, but I can't find them right now. I've got a C-mount-NEX adapter that also has m42 threads, making it about 3mm thick. The problem with any C-mount adapter in this setup is the risk of vignetting because of the narrow C-mount.