MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Rokkor 58mm F1.2 (Filing the rear element)
View previous topic :: View next topic  


Reply

The only place I've seen document this is in the rather hands-on conversion method. I have a Jim Bucchanan adapter. However, I want infinity focus on my 5d2. So.... I'm ready to file. However, I want to some tips first, if possible. I assume taking the rear element out is a given. I have a dremel and some of those sandpaper bits. However, I'm curious about protecting the actual glass. I don't have the steadiest of hands... nor do I have a vice or anything to hold the damn thing. I don't even have a garage. Smile

Anyway... laugh away, or feel free to give some pointers.

-Thanks.


Reply

Why ?
What camera do you intend to use ?
I wouldn't change the mount. I'd buy a mirrorless cam. IMO the value of the lens is better and rises (with mirrorless explosion of the market) if not touched .
If Canon EOS you can get a cheap body and change the mount


Reply

As stated in the original post, 5d2 (full frame).
I don't plan on buying a mirrorless camera in the short term, and if I do, I would likely not use this focal length on it. I might if something Canon makes matches the EQ of the 5d2. Even if they do, I have a 2nd one anyway. My needs are infinity focus on a full frame. Same question still applies.


Reply

I have filed down the back retaining ring during my Minolta Rokkor 58 conversion.
I have screwed the ring away to do this, and I worked with a file. A hand hold Dremel seems much to fast and not precise enough for me.

http://www.4photos.de/camera-diy/Fassung-abgefeilt-.jpg


Reply

Thanks for the info. What do you mean when you say "screwed the ring away"? The image looks like the adapter is still on it.

Cheers


Reply

You have skilled technicians in Tokyo , bring lens to them rather than ruin it by yourself.


Reply

I have filled the 5DII mirror, easy and work for all the lenses


Reply

kiss-o-matic wrote:
Thanks for the info. What do you mean when you say "screwed the ring away"? The image looks like the adapter is still on it...


I disassebled / screw the back retaining ring away. And filed it it then away from the lens. So no risk to damage the lens glass surface, or to get metal chips from the work inside the lens. The latter problem I had with a quick and dirty mount conversion, there I have used tape to prevent this, but it was not good enough.

You have to work careful, not press the retaining to much together.


Reply

Quote:
You have skilled technicians in Tokyo , bring lens to them rather than ruin it by yourself.


Do you have any of their contact information?

EDIT: There actually might be one not too far from me. Email sent.

Quote:
I have filled the 5DII mirror, easy and work for all the lenses


Thought about it, but I'm not really into this...

Quote:
I disassebled / screw the back retaining ring away. And filed it it then away from the lens. So no risk to damage the lens glass surface, or to get metal chips from the work inside the lens.


I see... I will check this out. Seems smarter. I will probably get the SMC 58mm and compare first to see if it is livable. Honestly, I probably only need one of the two . So far, I like this one a lot... I like the long throw of the manual focus.