Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!
SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Konica 57mm 1.2 lens mount
Post new topic   Reply to topic
Home   Manual Focus Lenses
View previous topic :: View next topic  


PostPosted: Wed Jan 15, 2014 8:21 am    Post subject: Konica 57mm 1.2 lens mount Reply with quote
Hi folks, my version is not fitting properly to my adapter or analogue cameras for some reason. There is a little right angled flange plate that appears to have some correlation to the aperture dial and this is not sitting flush with the mount sides. Is this a known issue and perhaps just a case of wear and tear or an issue more serious? I was hoping to be able to swap the mount over with one from the 3 x 50mm 1.8 lenses I have but they are clearly different in shape and size. Can anyone suggest a cure or is it off to the repair man once again?
Lovely lens, I would like to keep it. Crying or Very sad
Post new topic   Reply to topic
Home   Manual Focus Lenses
Page 1 of 1