| View previous topic :: View next topic |
| Author |
Message |
guardian
 Joined: 18 Mar 2009 Posts: 1750
|
 Posted: Wed Oct 03, 2012 12:11 pm Post subject: Any opinions on HELIMAX-XP? |
|
 Posted: Wed Oct 03, 2012 12:11 pm Post subject: Any opinions on HELIMAX-XP? |
|
|
guardian wrote:
I'd appreciate hearing opinions on HELIMAX-XP, especially if you have used this grease:
Click here to see on Ebay
This ships worldwide. It is not cheap, but it also is under US$10 so it is affordable for many.
The part of their write up that struck me especially was what they wrote about odor. They said if you can smell (whatever) grease it is wrong for lenses because you are smelling volatile substances which eventually will end up coating the lens elements. I found that an interesting test which seems to make sense. |
|
| Back to top |
|
 |
guardian
 Joined: 18 Mar 2009 Posts: 1750
|
 Posted: Wed Oct 03, 2012 7:51 pm Post subject: |
|
 Posted: Wed Oct 03, 2012 7:51 pm Post subject: |
|
|
guardian wrote:
Pursuant to this, I am just off the telephone with the applications engineer at Lubriplate. Thought they might make a grease for this application, helicoids. No dice. Helicoid grease is simply not their thing. The gentleman at Lubriplate suggested I contact Dow Corning, but accessing an expert there is less straightforward than at Lubriplate.
Apparently PTFE acts to hold onto the oil so it does not drop out and run, for example, onto the aperture blades. Lubriplate does not make a grease with PTFE. Dow Corning does, but their specialty products are darned expensive and, after review, I'm not at all sure their PTFE grease is appropriate anyway.
Guess I'm about ready to spend the money and buy an ounce of the subject grease. This does not appear to be something I can finagle on my own, or work around. Using the wrong grease owing to failed guesswork would appear at best unwise at this point, perilous at worst. Sometimes one simply must bite the bullet. |
|
| Back to top |
|
 |
guardian
 Joined: 18 Mar 2009 Posts: 1750
|
 Posted: Sun Oct 07, 2012 2:27 am Post subject: |
|
 Posted: Sun Oct 07, 2012 2:27 am Post subject: |
|
|
guardian wrote:
Bought a tub of HELIMAX-HP. They shipped the same day I ordered. Used it to grease a lens.
I'm pleased with my outcome and with the product. But I have to say, this one small tub is going to grease a really large number of lenses.
A tiny bit of this stuff goes a long, long way.  |
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Sun Oct 07, 2012 1:46 pm Post subject: |
|
 Posted: Sun Oct 07, 2012 1:46 pm Post subject: |
|
|
Attila wrote:
Nice find! Many thanks to sharing it!
I did fix your list , ebay listing will be gone 90 days later, picture is help to identify to late readers. I did also fix silly long url, right format is :
[ebay]271052175856[/ebay] |
|
| Back to top |
|
 |
guardian
 Joined: 18 Mar 2009 Posts: 1750
|
 Posted: Mon Oct 08, 2012 2:28 pm Post subject: |
|
 Posted: Mon Oct 08, 2012 2:28 pm Post subject: |
|
|
guardian wrote:
| Attila wrote: |
Nice find! Many thanks to sharing it!
I did fix your list , ebay listing will be gone 90 days later, picture is help to identify to late readers. I did also fix silly long url, right format is :
Click here to see on Ebay |
Thank you, Attila, for your very kind assist.
Yes, I see now the eBay option up above. Never noticed it prior. Will use it in future and try to post properly.
Thanks again!
This is an American company though they ship literally all around the world. I'm not sure how long this stuff will continue to be available if they rely primarily on American sales. It appears (to me) lens repair experts are more readily found outside America than here, which if true is a shame. It also would account for their very broad embrace of foreign sales. But this grease, just a tiny amount, goes so far and you need so little to do a good job. I just don't see how they will sell enough to remain in business selling for only US$10 (or less) per tub.
I have greased two lenses so far almost entirely from the grease which sloughed over onto the inside of the tub cover.
ETA
BTW I did find this grease to be odorless. IMO that is a good thing for grease used inside lenses. |
|
| Back to top |
|
 |
MrWhite
Joined: 15 Nov 2012 Posts: 1
|
 Posted: Thu Nov 15, 2012 10:23 am Post subject: |
|
 Posted: Thu Nov 15, 2012 10:23 am Post subject: |
|
|
MrWhite wrote:
I bought two boxes of HELIMAX-HP for $4.99 each. As guardian said, they shipped it very quickly.
It took 11 days to be delivered in Switzerland but the company is located near New-York and the huricane Sandy blocked all flights several days.
I have cleanned and greased a CZJ Tessar 50mm 1.8 full of sand and I'm very happy with the result. The focus ring is now smooth and precise.
The odor of this grease is very very light, almost odorless.
One box of HELIMAX-HP should be enought for hundreds of lens greasing. |
|
| Back to top |
|
 |
twinquartz
 Joined: 11 Jun 2012 Posts: 316 Location: Sweden
Expire: 2013-10-29
|
 Posted: Thu Nov 15, 2012 6:48 pm Post subject: |
|
 Posted: Thu Nov 15, 2012 6:48 pm Post subject: |
|
|
twinquartz wrote:
Thanks for the info. Just bought one.
That ebay store seems to offer quite a lot
of different greases/lubricants. |
|
| Back to top |
|
 |
guardian
 Joined: 18 Mar 2009 Posts: 1750
|
 Posted: Fri Nov 16, 2012 2:16 am Post subject: |
|
 Posted: Fri Nov 16, 2012 2:16 am Post subject: |
|
|
guardian wrote:
I'm pleased this is working out for you fellows.
Yes, the hurricane Sandy devastation is almost unimaginable. It is nearly beyond belief.
Oh my goodness, they really do offer a great many different specialty greases! I had not looked at those other offerings prior.
They offer a number of Dow Corning specialty products which, as I mentioned earlier, the engineer at Lubriplate had suggested I pursue.
However, it seems to me these people, being in the specialty grease business, know more about this than I do. Since they are selling Helimax specifically for helicoids, and since I've already bought a tub, I'm satisfied to stay with this product. Also it continues to appear as if one tub is going to last a long, long time.
I am impressed with their high vacuum grease offering, though. That would probably have been my second choice. A high vacuum grease is going to have a very, very low volatility. Of course, so does Helimax. |
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|