| View previous topic :: View next topic |
| Author |
Message |
woodrim
 Joined: 14 Jan 2010 Posts: 4069 Location: Charleston
|
 Posted: Sat Nov 10, 2012 6:51 pm Post subject: Need HELP |
|
 Posted: Sat Nov 10, 2012 6:51 pm Post subject: Need HELP |
|
|
woodrim wrote:
I've discovered that I'm very good disassembling lenses. This is evident by the number of disassembled lenses sitting around here. However, I absolutely rot at putting them back together. I've said it before and I still maintain that there were very sick minds that designed these lenses. I think such small springs and especially screws should be illegal. They can easily launch themselves across the room and are nearly impossible to find without a magnet or daughter with good, young eyes.
Is there someone in the U.S. that is proficient at re-assembling - especially getting those springs back on, adjusting infinity, etc???? The lens is my Topcor 100/2.8 that just suffered from not reaching infinity, but now is in pieces and not usable.
Frustrated.
Help please.
Thank you. _________________ Regards,
Woodrim |
|
| Back to top |
|
 |
mo
 Joined: 27 Aug 2009 Posts: 8979 Location: Australia
Expire: 2016-07-30
|
 Posted: Sun Nov 11, 2012 7:09 am Post subject: |
|
 Posted: Sun Nov 11, 2012 7:09 am Post subject: |
|
|
mo wrote:
I can't help you but I hear your pain...after disassembling two lenses ruining one and just barely putting the other back together I made the decision to pay someone else to do it.  _________________ Moira, Moderator
Fuji XE-1,Pentax K-01,Panasonic G1,Panasonic G5,Pentax MX
Ricoh Singlex TLS,KR-5,KR-5Super,XR-10
Lenses
Auto Rikenon's 55/1.4, 1.8, 2.8... 50/1.7 Takumar 2/58 Preset Takumar 2.8/105 Auto Takumar 2.2/55, 3.5/35 Super Takumar 1.8/55...Macro Takumar F4/50... CZJ Biotar ALU M42 2/58 CZJ Tessar ALU M42 2.8/50
CZJ DDR Flektogon Zebra M42 2.8/35 CZJ Pancolar M42 2/50 CZJ Pancolar Exakta 2/50
Auto Mamiya/Sekor 1.8/55 ...Auto Mamiya/Sekor 2/50 Auto Mamiya/Sekor 2.8/50 Auto Mamiya/Sekor 200/3.5 Tamron SP500/8 Tamron SP350/5.6 Tamron SP90/2.5
Primoplan 1.9/58 Primagon 4.5/35 Telemegor 5.5/150 Angenieux 3.5/28 Angenieux 3,5/135 Y 2
Canon FL 58/1.2,Canon FL85/1.8,Canon FL 100/3.5,Canon SSC 2.8/100 ,Konica AR 100/2.8, Nikkor P 105/2.5
Last edited by mo on Wed Nov 21, 2012 5:50 am; edited 1 time in total |
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Sun Nov 11, 2012 4:41 pm Post subject: Re: Need HELP |
|
 Posted: Sun Nov 11, 2012 4:41 pm Post subject: Re: Need HELP |
|
|
Attila wrote:
| woodrim wrote: |
I've discovered that I'm very good disassembling lenses. This is evident by the number of disassembled lenses sitting around here. However, I absolutely rot at putting them back together. I've said it before and I still maintain that there were very sick minds that designed these lenses. I think such small springs and especially screws should be illegal. They can easily launch themselves across the room and are nearly impossible to find without a magnet or daughter with good, young eyes.
Is there someone in the U.S. that is proficient at re-assembling - especially getting those springs back on, adjusting infinity, etc???? The lens is my Topcor 100/2.8 that just suffered from not reaching infinity, but now is in pieces and not usable.
Frustrated.
Help please.
Thank you. |
Ask Keh.com first, shipping cost from USA to Hungary and back 50-60 USD, labor fee in my guess is less.
If you not find better solution my repair man will fix them to you. |
|
| Back to top |
|
 |
woodrim
 Joined: 14 Jan 2010 Posts: 4069 Location: Charleston
|
 Posted: Wed Nov 14, 2012 8:44 pm Post subject: |
|
 Posted: Wed Nov 14, 2012 8:44 pm Post subject: |
|
|
woodrim wrote:
Attila: How much do you think your friend would charge? I can probably ship to you cheaper than your estimate. Do you know how much it costs to ship from you to Poland? I have a friend there that has to send me one or more lenses anyway. _________________ Regards,
Woodrim |
|
| Back to top |
|
 |
Jvg
 Joined: 07 Nov 2012 Posts: 205 Location: New York City
|
 Posted: Wed Nov 14, 2012 8:53 pm Post subject: Re: Need HELP |
|
 Posted: Wed Nov 14, 2012 8:53 pm Post subject: Re: Need HELP |
|
|
Jvg wrote:
| woodrim wrote: |
I've discovered that I'm very good disassembling lenses. This is evident by the number of disassembled lenses sitting around here. However, I absolutely rot at putting them back together. I've said it before and I still maintain that there were very sick minds that designed these lenses. I think such small springs and especially screws should be illegal. They can easily launch themselves across the room and are nearly impossible to find without a magnet or daughter with good, young eyes.
Is there someone in the U.S. that is proficient at re-assembling - especially getting those springs back on, adjusting infinity, etc???? The lens is my Topcor 100/2.8 that just suffered from not reaching infinity, but now is in pieces and not usable.
Frustrated.
Help please.
Thank you. |
i'm in the same boat. have 3 lenses that need to be repaired. so i did some search, asked around and most people recommended Nippon Photoclinic, here in NYC. I have not tried them yet, but will soon enough.
here's their contact info, give them a call
Nippon Photoclinic
920 Broadway Ste 705
(between 20th St & 21st St)
New York, NY 10010
Neighborhood: Flatiron
(212) 982-3177 |
|
| Back to top |
|
 |
Giklab
Joined: 30 Sep 2012 Posts: 21 Location: Slovenia
|
 Posted: Tue Nov 20, 2012 5:23 pm Post subject: |
|
 Posted: Tue Nov 20, 2012 5:23 pm Post subject: |
|
|
Giklab wrote:
Bumping out of interest/need
@Attila: How would one go about contacting your repairman? I tried to PM you a week or two ago, but I think it didn't work. I'm from Slovenia, so shipping isn't a problem at all. |
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|