Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!
SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Jupiter-37A with Nikon adapter
Post new topic   Reply to topic
Home   Adapters and other accessories
View previous topic :: View next topic  


PostPosted: Sun Jan 30, 2011 7:31 pm    Post subject: Jupiter-37A with Nikon adapter Reply with quote
Hello,

I´m trading my Auto Revuenon 55/1.4 lens for a Jupiter-37 A 135/3.5 lens.
The Jupiter is now in M42 mount.

Do I have to buy a Russian KP-A/N adapter in order to mount it on my Nikon or is it possible to use a T2 mount (removing the inner ring, or something?)

Thanks


PostPosted: Sun Jan 30, 2011 8:25 pm    Post subject: Reply with quote
It is possible to use the outer ring of a Nikon-T2 mount. However care is needed in selecting the brand - the inner diameter of the outer ring can vary. I have used the adapter labelled "Kood" - although I've seen the same adapter with other names or no name at all. Although it worked well there was a small amount of "play" at the F bayonet side.


PostPosted: Mon Jan 31, 2011 6:05 am    Post subject: Reply with quote
Thank You, John.

I´ll try with my no name T2-adapter, when I´ll get the lens.


PostPosted: Mon Oct 22, 2012 9:37 am    Post subject: Reply with quote
a bit late, but it may help someone else. I found the lens barrel too wide to fit inside a T2. So i ground out about half a mm from the inside of the T-mount with my dremel and the lens fits perfectly. Infinity focus too. Very happy
Post new topic   Reply to topic
Home   Adapters and other accessories
Page 1 of 1