 Posted: Wed Oct 24, 2012 7:59 am Post subject: |
|
 Posted: Wed Oct 24, 2012 7:59 am Post subject: |
|
|
nukemall wrote:
Aperture requires no lubrication. If aperture ring is too stiff - here needed some cleaning.
Unscrew two small(very small) screws on the back, then unscrew rounded nut. Lens block comes out.
(black holes on photo - from small screws, it drilled in the rounded nut)
Unscrew small screw on the side of lens block(it connects ring with aperture), then unscrew aperture ring. Clean the tread and rub it with the graphite pencil.
 |