MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Aperture re-lube Industar 50-2?
View previous topic :: View next topic  


Reply

Hi all!
Have just managed to re-lube the focus helical
of a cute little Industar 50-2, using a damping grease.
Worked perfectly.

But: now the aperture ring is too stiff.
Can anyone please point to a step-by-step aperture
lubrification guide?


Reply

Aperture requires no lubrication. If aperture ring is too stiff - here needed some cleaning.
Unscrew two small(very small) screws on the back, then unscrew rounded nut. Lens block comes out.

(black holes on photo - from small screws, it drilled in the rounded nut)


Unscrew small screw on the side of lens block(it connects ring with aperture), then unscrew aperture ring. Clean the tread and rub it with the graphite pencil.



Reply

Thank you very much! Spasibo!