MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Canon 550d + Tamron 135mm f/2.5 Adaptall-2
View previous topic :: View next topic  


Reply

So I was offered a Tamron 135mm f/2.5, it came with a Canon A-1 and an Adaptall-2 to FD converter.

As far as I understand all I need to get it working on my 550d is something like this

Does it focus on infinity with that adapter?

I also though of getting an Adaptall-2 to M42 adapter, then I add my M42 to EOS with focus confirmation to get focusing help, should I go for Adaptall-2 -> EOS, or Adaptall-2 -> M42 and M42 -> EOS? will using two adapter mess up the flange distance?

Thanks Very Happy


Reply

amando96 wrote:
So I was offered a Tamron 135mm f/2.5, it came with a Canon A-1 and an Adaptall-2 to FD converter.

As far as I understand all I need to get it working on my 550d is something like this

Does it focus on infinity with that adapter?

I also though of getting an Adaptall-2 to M42 adapter, then I add my M42 to EOS with focus confirmation to get focusing help, should I go for Adaptall-2 -> EOS, or Adaptall-2 -> M42 and M42 -> EOS? will using two adapter mess up the flange distance?

Thanks Very Happy


Welcome amando96

That third-party adapter should focus to infinity.

With EOS I use Adaptall-2-M42 with M42-EOS adapter, and AD2-Nikon with Nikon-EOS adapter, no problem with infinity focus. I like AD2-Nikon and Nikon-EOS adapter combination best because diaphragm ring works -- with AD2-M42 and M42-EOS adapter without flange, the diaphragm pin needs to be jammed (piece of foam) before the aperture works.


Reply

In theory, using 2 stacked adapters is the same as using just 1, so no messing up with distances.
Possible problems are that the 2 stacked adapters could be a bit unstable, and that you increase the chances of wrong distances by using 2 adapters, each one with its possible tolerances.
I would get the adaptall-EOS one, even because I don't rely on mf confirm, usually.


Reply

Hi guys, thanks for responses Smile

Might go via the M42 middleman route, that also allows me to use it on the Zenit(When the world as we know it ends all digital cameras will cease to work, so I must have a 100% manual camera in my bag Wink )

Although I won't like it if it's wobbly.

I have been used to using focus confirmation, I can generally focus without it, biggest aperture being f/2 on the Helios 44M, but with the beep I can do it much faster, the 135mm is also 200mm equivalent, so I know focus will be harder, AD2 -> EOS with focus confirmation are double the price, finances aren't too great.

Still checking if any locals have any of these so I can try them out and choose based on experience.

Also stumbled upon this: http://hackaday.com/2011/11/06/canon-fd-lenses-on-an-eos-mount/

Has anyone tried it? I have ripped apart a few lenses for cleaning, so the mod shouldn't be too hard.


Reply

There is no wobble. AD2 adapters don't wobble. Wink Tamron lens with AD2 adapter is as solid as any lens with same mount. Same as putting lens with same mount on camera adapter -- if camera adapter doesn't wobble with another lens it will not wobble with AD2 Tamron lens.


Reply

Awesome, AD2 -> M42 ordered, hope it gets here quick Very Happy

The DOF with this lens is incredibly shallow, about 5 times shallower than with the Helios @ same aperture


Reply

So the Adaptall -> M42 is here, and turns out I can't focus on infinity, the M42 stack height + the ad2 -> M42 stack height places the lens too far from the sensor, maximum focus distance is ~15m

Is there a way to somehow place the front element a little outward so it can focus further away?

I could also grind the Ad2 about 1.4mm to compensate for the M42's height, it's a 2 piece adapter.