Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!

SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Contax D Lens Compatibility
View previous topic :: View next topic  


PostPosted: Wed Sep 19, 2012 4:41 am    Post subject: Contax D Lens Compatibility Reply with quote

Hi - I'm new to vintage cameras as well as this forum, and have a question about a Contax D I recently aquired. The body came without a lens, and I was wondering if it's OK to use later M42 lenses with an auto diaphram pin on these cameras? Thanks for the help!

Russ


PostPosted: Wed Sep 19, 2012 9:25 am    Post subject: Reply with quote

If there is a pin, then also there must be a A/M switch so that the aperture closes when you turn the ring.

Someone please correct me if there are other issues?


PostPosted: Wed Sep 19, 2012 11:33 am    Post subject: Reply with quote

Look body inside at bottom part you should see a flange to push pin, if not there any flange you must use later lens with A/M switch and use lens in M mode where is pin not counted.